Search
Menu

Air Force Tests Directed Energy System in Wind Tunnel

Facebook X LinkedIn Email
ARNOLD AIR FORCE BASE, Tenn., Aug. 10, 2021 — The U.S. Air Force Research Laboratory (AFRL) is performing tests of directed energy (DE) systems in a wind tunnel to prepare the technology for airborne use. AFRL is working with the Aerodynamics Branch of the Arnold Engineering Development Complex at Arnold Air Force Base, which is helping the Air Force take directed energy systems airborne.

Directed energy systems use high-energy lasers or microwaves to degrade or destroy threats and targets.

“There is a growing interest for directed energy systems within the [Department of Defense] for many purposes, especially defending our systems and personnel,” said Rich Roberts, chief of the Aerodynamics Branch Store Separation Section. “There are a number of systems in use and being developed across the DoD. Integrating the DE systems on aircraft has obvious benefits, but also creates challenges, especially at higher speeds.”

During flight, an aircraft creates shockwaves and other aero-optics flow disturbances that can affect the beam quality and effectiveness of a directed energy system. Wind tunnel testing allows test engineers to visualize and measure these changes to the airflow while controlling variables such as Mach number and altitude pressure.

A directed energy test conducted recently in the 4-ft transonic wind tunnel at Arnold Air Force Base culminates approximately eight years of work between the Arnold Engineering Development Complex and MZA Associates through the Small Business Innovative Research and Commercial Readiness projects. The work aims to develop the Aero Isolation Measurement System to enable aero-optical DE testing in the wind tunnels.
Dr. Rich Roberts, chief of the Aerodynamics Branch Store Separation Section of Arnold Engineering Development Complex, looks at a directed energy system turret positioned on a sting in the 4-foot transonic wind tunnel at Arnold Air Force Base, Tenn., March 5, 2021. Courtesy of Jill Picket, U.S. Air Force.
Rich Roberts, chief of the Aerodynamics Branch Store Separation Section of Arnold Engineering Development Complex, looks at a directed energy system turret positioned in the 4-ft transonic wind tunnel at Arnold Air Force Base, March 5, 2021. Courtesy of Jill Picket, U.S. Air Force.

“Simply put, this system transmits a laser to the model, uses a miniaturized optical bench of sort inside the model, then uses fiber optics to pipe the data to a wave front sensor system,” Roberts said. “From there, we can analyze data that tells us how the laser was impacted by the tunnel flow field around the model.”


MZA was the customer for the recent test. The company has been working with the Defense Advanced Research Projects Agency on a supersonic aero-mitigation project with the goal of lessening the impact of high-speed flow over a turret. A prototype of a flow mitigation fence was tested.

“We are looking at how well this design controls the air flow over the turret to minimize the impact moving air has on the performance of the system,” Roberts said. “We are also comparing tunnel test data to previously generated CFD [computational fluid dynamics] data to make sure the simulations properly represent actual data. This test in 4T was the first time that this system has been experimentally tested at supersonic conditions, in addition to the first time that the AIMS system has been used at AEDC. The test went very well, getting all the priority data over two days of testing. An initial look at the data shows a significant improvement in beam quality using this new aerodynamic fence design.”

Building on this new capability, AEDC is working through a SBIR project to develop the Integrated Directed Energy Aero-Optical Surrogate, which is a subscale model of an F-15 Eagle aircraft with the ability to test laser pods. The IDEAS hardware is scheduled to undergo acceptance testing later this year.

“The ability to perform aero-optical tests of directed energy systems in the wind tunnels represents a new test capability for AEDC,” Roberts said. “As more DE systems are developed and integrated onto aircraft, we’ll be able to help with design decisions, creating employment envelopes, defining adjacent weapons load-outs, and other things routinely needed by program offices and manufacturers.”


Published: August 2021
Glossary
directed energy
Directed energy refers to a type of energy that is emitted and transferred in a controlled direction. The term is often associated with military and technological applications where energy, typically in the form of electromagnetic radiation, is focused and directed toward a specific target. Directed energy systems can take various forms, including lasers and high-power microwaves. The key characteristic is the intentional concentration of energy to achieve a desired effect on a target. In...
Businessmilitarymilitary & defenseLasersair forceDirected EnergyDirected Energy WeaponDirected Energy Weaponslaser-directed energy weapontestingaerospaceaerospace & defenseUnited States Air ForceUS Air ForceAmericas

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.