Search Menu
Photonics Media Photonics Buyers' Guide Photonics Spectra BioPhotonics EuroPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook
More News

An unexpected dark pulse laser

Facebook Twitter LinkedIn Email Comments
Hank Hogan,

Sometimes what isn’t there can be as interesting as what is. In working to develop mode-locked quantum dot diode lasers, researchers have discovered something unforeseen: a dark pulse laser. The device emits a steady beam of light, with periodic dips that are like dark pulses in the continuous bright background.

Dark pulse lasers are new, so applications for them are still a matter of speculation. But research leader Steven T. Cundiff, a physicist with the Gaithersburg, Md.-based National Institute of Standards and Technology (NIST), noted that if they can achieve the right performance, dark pulse lasers could prove beneficial. Some of the possible applications, for instance, are related to optical frequency combs and optical atomic clocks. “The continuous-wave background may provide a single strong comb line that could be used to probe a quantum transition, and then the train of dark pulses could be used to transfer that frequency information,” Cundiff said.

There are some potential telecom applications because of the lack of dispersion and the linearity during transmission of the dark pulses. However, he does not anticipate much use of dark pulse lasers in this area, largely because the industry already has solutions for fiber dispersion and linearity problems.

The light output from a dark pulse laser nearly vanishes every 2.5 ns, as shown in this colorized trace. Courtesy of the National Institute of Standards and Technology.

Cundiff and other researchers from NIST and from the University of Colorado at Boulder developed the dark pulse lasers. As noted in an Optics Express paper published in June 2010, they fabricated the device in a semiconductor cleanroom, burying an indium gallium arsenide quantum dot in the core of a 5-mm-long gallium arsenide ridge waveguide that acted as the gain medium.

They also created a saturable absorbing medium by damaging semiconductor wells in material they grew through molecular beam epitaxy. Because of its placement and optical properties, this acted as an end mirror to the laser cavity.

With careful alignment of the various components, they could start lasing action by injecting 60 mA of current into the device. When they looked at the device output, they found dark pulses, an unexpected result. These pulses could be as short as 90-ps duration, and in them, the laser intensity could drop to as low as 30 percent of the normal steady-state output.

These results can be predicted using the standard equations that describe mode-locked lasers. Cundiff noted that the researchers had to generalize the equations a bit to include new terms, such as one attributable to the electrical pumping of the quantum dots.

Dark pulse lasers have been built before, using mode-locked fiber lasers. However, the shaping of dark pulses in such lasers is dominated by nonlinearity and dispersion in the fiber. In contrast, simulations suggest that a quantum dot dark pulse will be largely shaped by the saturable absorber located at the end of the device. That could make tailoring of pulses to a specific application easier.

In addition, the quantum dot approach offers other pluses, Cundiff said. He listed three key advantages as compared with dark pulse fiber lasers: greater efficiency, smaller size and “potential diversity in wavelengths, because quantum dots can be grown to operate at many different wavelengths.”

He noted that his group is not now actively working in this area. Instead, it is concentrating on continued research into and development of mode-locked quantum dot diode lasers.

Photonics Spectra
Sep 2010
The separation of a beam into its various wavelength components. In an optical fiber, dispersion occurs because the differing wavelengths propagate at differing speeds. Also called chromatic dispersion.
laser cavity
A means of optical confinement intended to increase the gain length of radiation prior to emission from the device. The means of optical confinement used to increase gain path length vary depending upon the properties of the beam desired within the lasing medium. High light intensities occur within a laser cavity and dielectric mirrors coated for the lasing wavelength are used.The position and curvature of the optical cavity elements may be altered in order to optimize the laser performance as...
quantum dots
Also known as QDs. Nanocrystals of semiconductor materials that fluoresce when excited by external light sources, primarily in narrow visible and near-infrared regions; they are commonly used as alternatives to organic dyes.
Basic Sciencecomb lineCommunicationscontinuous waveCundiffdark pulsedark pulse laserdark pulse lasersdiode lasersdispersionend mirrorfiber lasersgain mediumGaithersburggallium arsenide ridge waveguideHank Hoganindium gallium arsenide quantum dotlaser cavityMarylandmode-locked fiber lasersmode-locked lasersmolecular beam epitaxyNational Institute of Standards and TechnologyNISTnonlinearityoptical atomic clocksoptical frequency combsOptics ExpressQD diode lasersqdsquantum dotsquantum transitionResearch & Technologysaturable absorbing mediumsemiconductor cleanroomsemiconductor wellsSteven T. CundiffTech PulsetelecomUniversity of Colorado Boulderlasers

back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2019 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA,

Photonics Media, Laurin Publishing
x Subscribe to Photonics Spectra magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.