Search Menu
Photonics Media Photonics Buyers' Guide Photonics EDU Photonics Spectra BioPhotonics EuroPhotonics Industrial Photonics Photonics Showcase Photonics ProdSpec Photonics Handbook
More News
Email Facebook Twitter Google+ LinkedIn Comments

Attosecond Science for Solids
Jul 2011
GARCHING, Germany, July 12, 2011 — A technique for controlling the motion of electrons using very fast laser pulses, first demonstrated using gaseous atoms or molecules, has been shown to work for electrons emitted from a solid. The results could allow the probing of electron dynamics in solid-state systems on subfemtosecond and subnanometer scales.

Metal tip irradiated with a laser pulse. (Image: Thorsten Naeser, MPQ)

In the field of attosecond science shaped laser pulses lasting a few femtoseconds (one femtosecond is 10-15 of a second) interact with electrons to produce highly energetic pulses of photons and electrons lasting less than 100 attoseconds (one attosecond is 10-18 of a second). Applied to atoms or molecules in the gas phase, this has allowed the dynamics of electrons to be studied and controlled in real time, at atomic scales.

Typical time structure of the electric field of femtosecond laser pulses. The maximum of the oscillation of the carrier wave (blue) depends on the phase relative to the maximum of “the envelope” (green). In the left pulse the phase difference amounts to 180 degree whereas in the right pulse it is 0 degree. (Image: MPQ)

Peter Hommelhoff and colleagues at the Max Planck Institute of Quantum Optics showed that femtosecond laser pulses can have the same effect on electrons emitted from a solid metal. They used laser pulses lasting 6 femtoseconds to liberate electrons from a nanometer-scale metal tungsten tip, and showed that the electrons are emitted in pulses lasting less than 500 attoseconds. Furthermore, just as in the gas-phase experiments, the electron motion depends strongly on the phase of the ‘carrier envelope’ of the laser pulses. This shows that the attosecond techniques developed for single atoms and molecules will be applicable to solids, and might also pave the way to ultrafast ‘lightwave’ electronics.

In the experiment a tungsten tip is irradiated with light pulses of few femtoseconds duration. If the intensity of the laser pulse is high enough the electrons can absorb the amount of energy that is necessary to be released from the metal tip. Then they can be registered by a detector in front of the tip.

As the tip is extremely sharp, having a curvature radius of about 10 nm only, the intensity of the laser light gets greatly amplified. With this, relatively weak laser pulses are sufficient to set free electrons from the metal surface. Because of their short duration the laser pulses contain a few cycles only. Therefore the electric field acting on a particular electron is strongly dependent on the phase shift of the carrier wave relative to the envelope of the pulse.

Energy spectra of electrons for different phase shifts (180 degree and 0 degree). At a phase shift of 180 degree pronounced equidistant maxima are observed, whereas there is no interference structure for 0 degree. The insets explain the physical processes: In the left picture electrons with high energies are emitted at two time intervals (red ellipse) during the pulse which leads to the quantum mechanical interference pattern of the spectrum. Instead, in the right picture electron emission is possible only once per pulse. Therefore no interference can occur. In this case, however, the electrons gain on average more kinetic energy, and the number of electrons at higher energies is larger. The shallow slope of the curve between 5eV and 10eV (especially at 0 degree) indicates elastic re-scattering in the laser field. (Image: MPQ)

In the experiment the number and the kinetic energy of the emitted electrons are measured for different phase shifts. The structure of the electron spectrum is strongly influenced by the phase shift. Here two spectra are displayed that have been taken with phase shifts differing by 180 degrees. First of all differences can be noticed concerning the number of electrons at high energies.

“The higher the electron energy, the more we approach the situation that we are able to switch the current on or off by simply changing the phase shift by 180 degrees,” said Michael Krüger, who with Markus Schenk, is a doctoral student with the experiment and one of the two main authors of the study published in the journal Nature.

It is also determined by the chosen phase shift whether pronounced peaks in the spectra can be observed or not. These maxima are a consequence of the quantum mechanical wave nature of electrons: At a phase shift of 180 degrees electrons can be emitted during two time intervals of the light pulse. The interference of the two matter wave packets at the metal tip leads to the observed interference structure in the spectrum. If, on the other hand, the phase shift equals 0 degree, electrons can be emitted only once per pulse. Hence no interference can occur, and the maxima disappear.

“We therefore obtain information on the electron dynamics with attosecond precision, a region, that we cannot access using conventional electronics,” said Schenk.

A tungsten tip is irradiated with a laser pulse (indicated by a red ball). The blue wave illustrates the interference pattern of the two electrons emitted from the tip. (Image: Christian Hackenberger)

From the slope of the spectrum the scientists conclude that the laser field continues to influence the motion of the electrons even after emission from the metal tip. The almost constant count rate at medium high energies implies that the released electrons are driven back into the tip by the laser field and scatter elastically off the tip before being detected.

“As is demonstrated in the experiment this scattering process does not destroy the interference of the electron wave packets, that means, it takes place in a coherent way,” Schenk said. The resulting spectra are surprisingly well reproduced with numerical calculations based on a simple model that describes the motion of the electrons in the electric field of the laser classically but takes their wavelike nature into account.

For the first time the physicists have succeeded in the steering of electrons emitted from a solid state by the field of a femtosecond laser pulse. Even more, much less intensity was required compared to experiments with electrons in atomic or molecular gases. On the one hand, the new method is an important tool for gaining insight into the dynamics of electrons in solid state surfaces. For example, it is not known whether the scattering process takes place at the entire surface or at a single atom inside or on the surface. On the other hand, because of the low laser intensities required, there is a high potential for practical applications. Combining a metal tip, a retardation grid, and an electron multiplier, compact devices for the measurement and stabilization of phases of laser pulses could be realized. Also the development of optical field effect transistors can be envisaged in which the electric current can be switched on and off by the light field with attosecond precision.

For more information, visit:  

attosecond scienceBasic ScienceEuropefemtosecond laser pulsesGermanyMarkus SchenkMax Planck Institute of Quantum OpticsMichael KrügeropticsPeter HommelhoffResearch & TechnologySensors & Detectorsshaped laser pulsestungsten tipultrafast lightwave’ electronicslasers

Terms & Conditions Privacy Policy About Us Contact Us
back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2018 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA,

Photonics Media, Laurin Publishing
x We deliver – right to your inbox. Subscribe FREE to our newsletters.
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.