Search Menu
Photonics Media Photonics Marketplace Photonics Spectra BioPhotonics EuroPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook

Bell Labs Proposes Multiplexing Scheme for Petabit Communications

Facebook Twitter LinkedIn Email Comments
MURRAY HILL, N.J., Nov. 23, 2015 — A new multiplexing scheme could allow optical networks to transmit data at petabits per second — creating enough capacity to allow two-thirds of the U.S. population to simultaneously stream HD movies over a single optical fiber.

Real-time space-division multiplexed optical multiple-input-multiple-output (MIMO-SDM) was developed at Bell Labs.

The technique was tested using six transmitters and six receivers in combination with real-time digital signal processing over a 60-km-long coupled-mode fiber. Where previous experiments used off-line processing, MIMO-SDM eliminated crosstalk from multiple signals using real-time processing.

Implemented on a large scale, the technique has the potential to increase today's 10- to 20-Tb/s fiber capacities to the equivalent of 1000 Tb/s, according to Bell Labs. This would overcome the nonlinear Shannon limit, a theoratical limit on the information transfer rate of current optical fiber.

"This experiment represents a major breakthrough in the development of future optical transport," said Marcus Weldon, president of Bell Labs and chief technology officer of its parent company, Alcatel-Lucent. "We are at the crossroads of a huge change in communications networks, with the advent of 5G wireless and cloud networking underway. Operators and enterprises alike will see their networks challenged by massive increases in traffic."

The findings were presented at the IEEE Photonics Conference last month in Reston, Va.

Bell Labs is the research arm of the French telecommunications company Alcatel-Lucent SA. For more information, visit
Nov 2015
The combination of two or more signals for transmission along a single wire, path or carrier. In most optical communication systems this is referred to as wavelength division multiplexing, in which the combination of different signals for transmission are imbedded in multiple wavelengths over a single optical channel. The optical channel is a fiber optic cable or any other standard optical waveguide.
BusinessResearch & TechnologyAmericasNew JerseyBell LabsAlcatelLucentfiber opticsCommunicationsMIMO-SDMmultiplexing

view all
back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2021 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, [email protected]

Photonics Media, Laurin Publishing
x We deliver – right to your inbox. Subscribe FREE to our newsletters.
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.