Search Menu
Photonics Media Photonics Buyers' Guide Photonics Spectra BioPhotonics EuroPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook
More News

Blue Diodes Get Ultrashort Pulses

Facebook Twitter LinkedIn Email Comments
Michael D. Wheeler

PicoQuant GmbH has introduced a blue diode laser system with a picosecond pulse width and high repetition rate that may prove useful as an excitation source in time-resolved fluorescence research.

The German company has taken the Japan-based Nichia Chemical Industries Ltd.'s blue diode laser and applied its own proprietary technique to create ultrashort pulses, resulting in a commercially available laser with a 50-ps pulse, a repetition rate up to 40 MHz and a center wavelength at 400 nm. The average power is 1 mW, with a peak power of up to 400 mW.

Biochemical analysis

The commercial availability of these diode lasers could mean good news for those performing time-correlated fluorescence spectroscopy, a powerful tool used in biochemical analysis, such as identifying a single antigen or strand of DNA. The technique derives its sensitivity from measuring the short time it takes for a given fluorophore to decay. The problem arises in attempting to record the time-decay profile of the signal from a single excitation-emission cycle. Typical fluorescence from organic fluorophores lasts only a few hundred picoseconds to a few nanoseconds, placing a stringent demand on the excitation source and detector.

Finding a short-wavelength excitation source with ultrashort pulses and enough power was a particularly thorny problem. In the past, the common sources were nanosecond flashlamps and Ti:sapphire or argon-ion lasers. Although inexpensive, flashlamps had low repetition rates and low power. Frequency-doubled Ti:sapphire or argon-ion dye lasers were an improvement, but they were bulky and prohibitively expensive.

"These systems have been around for a while and are intended for people well-trained in optics and electronics," said Steve Soper, an assistant professor at Louisiana State University in Baton Rouge, who installed a Ti:sapphire for time-correlated single-photon counting several years ago.

"Between the optical table, laser, optics and electronics, the cost was about $160,000. Now with a pulsed diode, you're looking at a much lower cost," he said.

Although PicoQuant's blue diode lasers have been available for only weeks, Soper said they could have a large impact on areas like DNA sequencing and other bioanalytical research.

"One of the big points with our system is it's cheap and easy to handle," said Michael Wahl, a senior scientist at PicoQuant. The company has already received the first orders for the lasers, which will initially cost less than $20,000.

Photonics Spectra
May 1999
Research & TechnologySensors & DetectorsTech Pulse

back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2019 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA,

Photonics Media, Laurin Publishing
x Subscribe to Photonics Spectra magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.