Close

Search

Search Menu
Photonics Media Photonics Buyers' Guide Photonics Spectra BioPhotonics EuroPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook
More News

Bowtie Photonic Crystal Allows Extreme Light Concentration with Low Loss

Facebook Twitter LinkedIn Email Comments
A new nanostructure that is part bowtie and part funnel has been shown to focus and conduct light powerfully and nearly indefinitely, as measured by a scanning near-field optical microscope. The bow-tie photonic structure, developed by a team at Vanderbilt University, allows light to be squeezed into very small volumes, which yield very high levels of energy. The Vanderbilt team collaborated with researchers at the IBM T.J. Watson Research Center and the University of Technology in Troyes, France, to fabricate the device.

The research is based on Maxwell’s equations, a 19th-century text familiar to college physics students. By applying these equations in a new way and structuring materials at the nanoscale — the size of the bowtie structure is just 12 nm — the researchers developed a low-loss, dielectric bowtie photonic crystal structure that could support mode volumes commensurate with plasmonic elements.

Bowtie photonic crystal structure, Vanderbilt University.

Researchers at Vanderbilt University developed a structure that is part bowtie, part funnel and that conducts light powerfully and indefinitely, as measured by a scanning near-field optical microscope. Courtesy of Ella Maru Studio.

To create the bowtie shape, the researchers combined a nanoscale air slot surrounded by silicon with a nanoscale silicon bar surrounded by air.

The team believes that its approach could open the door to the extremely strong light-matter interaction regime that incorporates both an ultralow mode volume and an ultrahigh quality factor. The strong light-matter interaction platform could be used in a range of applications, including low-power optoelectronics, nonlinear optics, and quantum optics.

“The use of the bowtie shape concentrates the light so that a small amount of input light becomes highly amplified in a small region,” said professor Sharon Weiss. "We can potentially use that for low-power manipulation of information on computer chips."

Researcher Shuren Hu said there are generally two ways to increase optical energy density: Focus light down to a small tiny space and trap light in that space as long as possible. “It has been a prevailing belief in photonics that you have to compromise between trapping time and trapping space," said Hu. "The harder you squeeze photons, the more eager they are to escape.”

The researchers will continue work on improvements to the device and explore its possible application in future computer platforms.

The research was published in Science Advances (doi: 10.1126/sciadv.aat2355).


Using the new bowtie structure, future computers and smartphones could potentially operate faster, with lower power requirements and less heating. Courtesy of Vanderbilt University.

Photonics Spectra
Nov 2018
Research & TechnologyeducationAmericasEuropesilicon photonicsopticsnanonanostructurebowtie photonic structurelight sourceslight-matter interactionoptical energydielectric structureVanderbilt UniversityTech Pulse

Comments
back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2019 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, info@photonics.com

Photonics Media, Laurin Publishing
x Subscribe to Photonics Spectra magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.