Search
Menu
Hamamatsu Corp. - Earth Innovations LB 2/24

Brighter Whites, Greens and Blues in Store for LEDs

Facebook X LinkedIn Email
ALBUQUERQUE, N.M., April 25 -- A new process of growing gallium nitride on an etched sapphire substrate, called cantilever epitaxy, may help light up the world with brighter green, blue and even white semiconductor light-emitting diodes (LEDs), or solid-state lighting.

The process was developed at the Department of Energy's Sandia National Laboratories. Colored LEDs are of interest for displays and even higher-powered lamps like traffic lights. A national initiative is beginning to develop solid-state sources for high-efficiency white lighting.

"Our new process eliminates many of the problems that have limited the optical and electronic performances of LEDs previously grown on sapphire/gallium nitride substrates," said Sandia researcher Carol Ashby.

Over the past several years, LEDs have been grown with various combinations of gallium nitride alloys on sapphire substrates. However, the atoms of the two materials do not line up perfectly, due to differences in the natural lengths of the bonds in their respective crystal lattices. Regions of imperfections, called dislocations, accommodate this lattice mismatch. These dislocations limit LEDs' brightness and performance. The new cantilever epitaxy process developed by a team of Sandia researchers reduces the numbers of dislocations, giving the potential for longer-lived and better performing LEDs. It also means that LEDs grown on the patterned sapphire/gallium nitride substrates can produce brighter, more efficient, green, blue and white lights than previously accomplished.

Sandia researcher Christine Mitchell said that a lot of background research has made these improvements possible. Mitchell is investigating cantilever epitaxy as her thesis project for a master's degree in electrical engineering at the University of New Mexico. She has been involved in just about all stages of the process.

"At Sandia, we have four years of experience studying the fundamentals behind gallium nitride growth," she said. "We took data from basic science work and transitioned it to this."

Two methods, using transmission electron microscopy (TEM) and scanning electron microscopy (SEM), have been developed to determine the amount of dislocations eliminated through the cantilever epitaxy process. Sandia researcher David Follstaedt slices the material and looks at it "end on" using cross section TEM. (The TEM is a high-voltage microscope that looks through specimens only tenths of microns thick.)

These images showed that facets developed early in the cantilever growth process can turn dislocations very effectively when they are grown to full pyramids. Another TEM imaging orientation is called plan view. Most of the bottom of the sapphire substrate and some of the gallium nitride are removed, and the TEM looks through the remaining gallium nitride at the top.

"This is where the rubber meets the road," Follstaedt says. "This is where you see how many dislocations remain."

In the other method, called cathodoluminescence, researcher Nancy Missert can check broad areas of the gallium nitride using a SEM equipped with a light detector. This method can survey a whole wafer in half a day and is less labor- and time-intensive than TEM. The dislocations are at points on the surface where the light is not emitted and appear dark. Counting the dark spots gives a measure of the density of dislocations.

Sandia has conducted studies that show good correlation between the two techniques. Both showed that the cantilever epitaxy process reduced the number of dislocations "to an order of a magnitude lower than conventional growth on planar sapphire," Follstaedt said.

shby said that because of the reduction in dislocations, the cantilever epitaxy process shows "great promise for making a superior substrate for light-emitting devices. It also has potential for applications to a wide variety of electronic devices and GaN integrated circuit technology."

Ashby, Follstaedt, Mitchell and Jung Han have recently been awarded a patent for the cantilever epitaxy process. Cantilever epitaxy substrates have been supplied to LED manufacturers for testing, which should encourage future licensing.

The cantilever epitaxy program at Sandia is part of an internal three-year $6.6 million Laboratory Directed Research and Development Grand Challenge. Funding for the program also comes from a grant from the Department of Energy Office of Building Technologies for a collaborative project with Lumileds Lighting, a joint venture between Agilent Technologies and Phillips Lighting.

For more information, visit: lighting.sandia.gov

Cognex Corp. - Smart Sensor 3-24 GIF MR

Published: April 2003
Glossary
gallium nitride
Gallium nitride (GaN) is a compound made up of gallium (Ga) and nitrogen (N). It is a wide-bandgap semiconductor material that exhibits unique electrical and optical properties. Gallium nitride is widely used in the production of various electronic and optoelectronic devices, including light-emitting diodes (LEDs), laser diodes, power electronics, and high-frequency communication devices. Key points about gallium nitride (GaN): Chemical composition: Gallium nitride is a binary compound...
cantilever epitaxyConsumergallium nitridelight-emitting diodesMicroscopyNews & FeaturesSandia National Laboratoriessapphire substrateSensors & Detectorssolid-state lightingLEDs

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.