Built Off Anti-Laser, Device Directs Electromagnetic Waves

Facebook X LinkedIn Email
Building off a breakthrough “anti-laser,” a team of researchers from Yale University’s School of Engineering and Applied Sciences has developed a system that can direct light and other electromagnetic waves for signal processing without any unwanted signal reflections.

Team leader A. Douglas Stone led another team just over 10 years ago in the creation of an “anti-laser,” or “coherent perfect absorber” (CPA). Rather than emitting a beam as a laser does, an anti-laser absorbs input light with the same level of precision.

In a laser, light bounces back and forth between two mirrors, each time passing through an amplifying material — known as the “gain medium” — such as gallium arsenide. Because the light is of a specific wavelength, it creates feedback that increasingly gains in intensity. In a typical light source, like an ordinary light bulb, for example, atoms radiate independently and create light of many different wavelengths, and light goes in many directions as a result. In lasers, however, atoms radiate at the same frequency and in the same direction, creating a concentrated beam of a single wavelength.

The difference in the anti-laser is that instead of using an amplifying material, it uses one that absorbs light — that is, a “loss medium.” In its simplest version, the anti-laser splits a single laser beam into two and directs the two beams into each other, meeting at a paper-thin silicon wafer. The light’s waves are precisely tuned to interlock with each other and become trapped. They then dissipate into heat.

In the new work, the researchers built off this concept and developed a device based on what they call “reflectionless scattering modes” (RSMs).
“We asked if there is some principle like this where we can guide light instead of transducing it into another form of energy,” said Stone, the Carl A. Morse Professor of Applied Physics and Physics. “Because with optical fibers and modern photonic circuits, guiding light and not having any of it reflect back is extremely valuable.”

From there, they developed the device that, instead of absorbing the waves, redirected them to specific channels. Stone worked on the theoretical side of the project, while Philipp del Hougne of University of Rennes in France built the actual device.

“Instead of having it all transduced, it could either all go into our chosen output channels or some of it could be absorbed and the rest go into the output channels,” Stone said. “In the next step, we want to make a similar device where the absorption is negligible, so that all of the energy is efficiently routed to perform its information or sensing function. There is great interest in such technologies to reduce the power consumption of cellphone networks, for example.”

The device eliminated signal reflections, which have long been a problem for signal routers, a pivotal ingredient of modern nanophotonic and radiofrequency networks. Besides causing a loss in signal power, such reflections can cause devastating unwanted reflected-signal-power echoes in the network.

The research was published in Science Advances (

Published: February 2023
Research & TechnologyLasersOpticsMaterialscoherent perfect absorbergain mediumlossYaleYale SEASSchool of Engineering and Applied Sciencesanti-laserreflectionless scattering modesAmericasScience Advances

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.