Search Menu
Photonics Media Photonics Marketplace Photonics Spectra BioPhotonics EuroPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook

CO2 Lasers Expose Hypersonic Flow

Facebook Twitter LinkedIn Email Comments
Paula M. Powell

A two-hour flight from New York to Tokyo could someday be a reality with the development of a hypersonic transatmospheric vehicle. Such aircraft, though, would routinely face aerodynamic drag and heating on a par with conventional spacecraft developed for less-routine flights. In the early 1990s, researchers first coined the term DEAS, or directed energy air spike, to describe a method to reduce drag and heating by adding energy to the air ahead of the vehicle. One way to accomplish this would be to focus a powerful laser beam ahead of the flight path.

Marco A.S. Minucci and colleagues at the Laboratory of Aerothermodynamics and Hypersonics-CTA in São José dos Campos, Brazil, are studying the DEAS effect using optical breakdown upstream of a model that is induced by a CO2 transversely excited atmospheric pressure laser.

Open Shutter Image
Taken with an SLR Nikon camera using ASA 100 Kodak color film, this open-shutter image shows a test done with airflow of Mach 7.3 and 5.5-J laser energy (single pulse). Pictured are the expected bow shock (luminous layer near model surface) and the conical flow structure (initiated by laser-induced breakdown). Both flow structures are superimposed because of the nature of the time-integrated photography technique. Airflow is from right to left.

The 100-mm-diameter test subject features the same geometry as the re-entry heat shield of an Apollo spacecraft and is fitted with piezoelectric pressure transducers and platinum thin-film heat-transfer gauges.

In collaboration with a US-based research team, the scientists are conducting the experiments in the Brazilian lab's 0.3-m hypersonic shock tunnel, which can produce airflow with Mach numbers up to 15 and air velocities approaching 5 km/s. In multimode operation, the laser can produce a single, high-energy -- 7.5-J -- 120-ns pulse. The beam, which has a 34 x 17-mm cross section, is focused 95 mm ahead of the model's front surface through a 50-mm-diameter NaCl lens with a 180-mm focal distance. The lens mount is in a beam delivery system installed in the tunnel test section wall at a 45° angle with respect to the model centerline.

The scientists synchronize the laser pulse with the shock tunnel useful test time via a time-delay generator triggered by a piezoelectric pressure transducer immediately upstream of the nozzle entrance. They use three Hamamatsu germanium photodiodes as light sensors to monitor pulse generation inside the laser head, production of the laser-induced air ignition inside the test section, and the natural air luminosity of the hypersonic, hypervelocity flow around the model.

In one test, time-lapse imaging during flow at Mach 7.3 allowed the researchers to visualize both the expected bow shock and the conical flow structure initiated by laser-induced breakdown. While the research into laser-induced DEAS is ongoing, Minucci reports that drag reduction of up to 40 percent has been detected so far, with all the luminosity gener-ated only by the flow.

Photonics Spectra
Jul 2003
Accent on ApplicationsApplicationsdirected energy air spikeflight pathHypersonic flowhypersonic transatmospheric vehicleLaser BeamSensors & Detectors

back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2020 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, [email protected]

Photonics Media, Laurin Publishing
x Subscribe to Photonics Spectra magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.