Search Menu
Photonics Media Photonics Buyers' Guide Photonics Spectra BioPhotonics EuroPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook

Camera Flash Forms Conductor

Facebook Twitter LinkedIn Email Comments
EVANSTON, Ill., Aug. 13, 2009 – A new way of turning graphite oxide – a low-cost insulator made by oxidizing graphite powder – into graphene has been discovered. Scientists believe graphene, a hotly studied material that conducts electricity, could be used to produce low-cost carbon-based transparent and flexible electronics.

The new process invented by Jiaxing Huang, assistant professor of materials science and engineering at Northwestern University's McCormick School of Engineering and Applied Science, and his graduate student Laura J. Cote and postdoctoral fellow Rodolfo Cruz-Silva, actually uses a camera flash to instantly heat up graphite oxide and turn it into graphene. Previous processes to reduce graphite oxide relied on toxic chemicals or high-temperature treatment.

Materials scientists previously have used high-temperature heating or chemical reduction to produce graphene from graphite oxide. But these techniques could be problematic when graphite oxide is mixed with something else, such as a polymer, because the polymer component may not survive the high-temperature treatment or could block the reducing chemical from reacting with graphite oxide.

In Huang's flash reduction process, researchers simply hold a consumer camera flash over the graphite oxide and, a flash later, the material is now a piece of fluffy graphene.

"The light pulse offers very efficient heating through the photothermal process, which is rapid, energy efficient and chemical-free," he said.

When using a light pulse, photothermal heating not only reduces the graphite oxide, it also fuses the insulating polymer with the graphene sheets, resulting in a welded conducting composite.

Using patterns printed on a simple overhead transparency film as a photo-mask, flash reduction creates patterned graphene films. This process creates electronically conducting patterns on the insulating graphite oxide film – essentially a flexible circuit.

The research group hopes to next create smaller circuits on a single graphite-oxide sheet at the single-atom layer level. (The current process has been performed only on thicker films.)

"If we can make a nano circuit on a single piece of graphite oxide," Huang said, "it will hold great promise for patterning electronic devices."

Huang’s work was published in the Aug. 12 issue of the Journal of the American Chemical Society.

For more information, visit:
Aug 2009
The technology of generating and harnessing light and other forms of radiant energy whose quantum unit is the photon. The science includes light emission, transmission, deflection, amplification and detection by optical components and instruments, lasers and other light sources, fiber optics, electro-optical instrumentation, related hardware and electronics, and sophisticated systems. The range of applications of photonics extends from energy generation to detection to communications and...
camera flashchemicalselectricity conductorsflash reduction processflexible circuitflexible electronicsgraphenegraphite powderJiaxing HuangNews & Featurespatterning electronic devicesphoto-maskphotonicsphotonics.comphotothermal processResearch & Technologywelded conducting composite

back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2020 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, [email protected]

Photonics Media, Laurin Publishing
x We deliver – right to your inbox. Subscribe FREE to our newsletters.
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.