Search Menu
Photonics Media Photonics Marketplace Photonics Spectra BioPhotonics EuroPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook

Common-Path Digital Holography Offers High Stability for Optical Measurement

Facebook Twitter LinkedIn Email Comments
XI’AN, China, Oct. 5, 2021 — Compact, common-path digital holography could play an important role in the manufacture of highly stable optical measurement and imaging instruments, according to a scientific group at Northwestern Polytechnical University in China. The group published its review of the different approaches to common-path, off-axis digital holography and investigated the advances that have been made in this branch of optics.

The temporal stability of the experimental setups for hologram recording can be significantly improved for time-lapsing measurements, the research group determined. It additionally categorized three distinct, common-path models: lateral shearing, point diffraction, and other. These categorizations were based on the different approaches used to generate the reference beam.

In conventional off-axis holographic setups, the object and reference beams propagate along separate paths. This can result in low temporal stability. Common-path configurations that allow the two interference beams to share the same or similar paths can compensate for the effect of environmental disturbances and improve the temporal stability of the experimental setups for hologram recording and time-lapse measurements.

The researchers say that the key to designing a common-path configuration is to generate a uniform reference beam that allows the two interference beams to pass along similar paths. The more similar the paths are, the more stable the optical setup will be.

In their paper, the group, led by professor Jianlin Zhao, described the design principles for each category, presented application examples, and explored commercial manufacturing prospects for the use of common-path, off-axis digital holography in high-stability optical instrument manufacturing.

In a lateral-shearing-based approach, the beam carrying the object information is doubled using a glass plate, grating, or beamsplitter. The portions of the two beams that are with and without the sample information create the shearing interference. Both beams carry the same sample information. However, a uniform reference beam containing no sample information is required for the hologram formation.

Therefore, the test sample in the lateral shearing-based common-path configuration must be sparse in the field of view, or only a portion of the beam will illuminate the sample. In this manner, the effective interference area, that is, the overlapping area of the two beams with and without the sample information, is achieved.

Lateral shearing supports a simple, compact design. However, because it requires an undisturbed portion of the illumination beam to generate the reference beam, the field of view is reduced. It is typically used for spatially sparse samples, the researchers said.

The point-diffraction-based approach to common-path, off-axis digital holography is so called by the researchers because it generates the uniform reference beam by diffracting the object beam through a “point” pinhole, via low-pass filtering in the Fourier domain. The interference beams pass through identical optical elements, ensuring high temporal stability. This approach addresses the issue of a limited field of view, but typically requires a complex configuration.

Point diffraction is suitable for measuring microscopic samples with high spatial frequency, as it is relatively easy to generate the uniform reference beam by spatial filtering. Owing to its high stability and compact features, the point-diffraction-based common-path digital holographic microscope has been widely used in biological studies and material science applications.

In the third category, the researchers include advanced designs that used folding mirrors, specially positioned beamsplitter cubes, and Wollaston prisms. One example used a self-referencing Lloyd’s mirror configuration. The laser beam passing through the sample is first expanded via a microscope objective. Then, a mirror folds a part of the divergent beam onto the CMOS target. The straight propagating beam carrying the object information and unperturbed reflection beam interfere with each other to form the off-axis hologram.

(a), (b): Concepts of common-path configuration based on lateral shearing and point diffraction. (c1-c3):  Experimental setups of common-path digital holography using folding Lloyd’s mirror, mirror pair, and specially-positioned beam splitter cube. Courtesy of Jiwei Zhang, Siqing Dai, Chaojie Ma, Teli Xi, Jianglei Di, and Jianlin Zhao.
(a), (b): Concepts of common-path configuration based on lateral shearing and point diffraction. (c1-c3): Experimental setups of common-path digital holography using folding Lloyd’s mirror, mirror pair, and specially positioned beamsplitter cube. Courtesy of Jiwei Zhang, Siqing Dai, Chaojie Ma, Teli Xi, Jianglei Di, and Jianlin Zhao.
According to the researchers, this setup is compact, portable, stable, and easy to implement.

Other advanced designs have been proposed to construct common-path, off-axis holographic experimental setups. These innovative designs could overcome the drawbacks of lateral shearing and point diffraction.

Common-path configurations typically include fewer optical components than traditional interferometers, which makes them desirable for the manufacture of compact, highly stable off-axis holographic instruments. The instrumentation of common-path digital holography could open a path to new interdisciplinary research directions in the fields of optical, electronic, and mechanical engineering. Owing to the high stability of common-path holographic instruments, their use does not need to be confined to laboratories. The researchers believe they could be of wide use in the chemical industries, biomedicine, and other fields.

The research was published in Light: Advanced Manufacturing (
Sep 2021
The optical recording of the object wave formed by the resulting interference pattern of two mutually coherent component light beams. In the holographic process, a coherent beam first is split into two component beams, one of which irradiates the object, the second of which irradiates a recording medium. The diffraction or scattering of the first wave by the object forms the object wave that proceeds to and interferes with the second coherent beam, or reference wave at the medium. The resulting...
The study and utilization of interference phenomena, based on the wave properties of light.
opticsoptical holographyholographydigital holographyAsia PacificTest & Measurementinterferometricsinterferometryeducationoptical manufacturingbeam manipulationoptical instrumentsNorthwestern Polytechnical Universitymirrorsoptical components

view all
Search more than 4000 manufacturers and suppliers of photonics products and services worldwide:

back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2021 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, [email protected]

Photonics Media, Laurin Publishing
x We deliver – right to your inbox. Subscribe FREE to our newsletters.
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.