Search Menu
Photonics Media Photonics Buyers' Guide Photonics EDU Photonics Spectra BioPhotonics EuroPhotonics Industrial Photonics Photonics Showcase Photonics ProdSpec Photonics Handbook
More News
Email Facebook Twitter Google+ LinkedIn Comments

Compact Nd:YAG Laser Developed for Airborne, Space Applications

Photonics Spectra
Aug 2006
Master oscillator power amplifier system is longitudinally pumped.

Breck Hitz

Compact, robust, efficient nanosecond sources are essential in many emerging airborne and spacecraft applications, including lidar, altimetry and remote spectroscopy, where high voltages and bulky heat exchangers are not practical. Recently, a collaboration of scientists at EADS Deutschland GmbH in Munich and at Dilas Diodenlaser GmbH in Mainz-Hechtsheim, both in Germany, demonstrated an Nd:YAG, fiber-coupled oscillator-amplifier capable of producing stable, ∼5-ns, 68-mJ pulses at a 20-Hz repetition rate.

The system comprised a passively Q-switched oscillator, a quadruple-pass amplifier and a final, double-pass power amplifier (Figure 1). It was pumped by two remote diode laser modules, which were coupled to the laser head with optical fibers. There were two eight-bar stacked arrays of AlGaAs lasers in each module, producing a quasi-continuous output of 1600 W at 807 nm. Thermal considerations limited the quasi-continuous duty cycle to 2 percent. A prism array in each module reshaped the asymmetric beam into a near-circular one that could be coupled into the 0.22-NA fiber. About two-thirds — or ∼1 kW — of the diode power from each module was transmitted through the corresponding fiber to the laser head.

Figure 1. Two diode laser pump modules powered the oscillator-amplifier system. The output of one module was divided between the oscillator and the first amplifier, and the output of the second went to the final power amplifier. Images ©OSA.

Eighty percent of the incoming pump power on one fiber was diverted to the first amplifier, while the remaining ~200 W pumped the oscillator. A diaphragm between the fiber and the oscillator provided a mechanism to independently adjust the pump power to the oscillator, thereby fine-tuning the timing of the passively Q-switched pulse relative to the population inversion in the amplifier stages. A small crystal of Cr4+:YAG, whose small-signal transmission was 20 percent, provided the saturable absorption necessary to Q-switch the oscillator.

Four carefully aligned mirrors reflected the pulses from the oscillator back and forth for two double passes through the 6-mm-diameter, 20-mm-long Nd:YAG rod in the first amplifier stage. Each double pass followed a V-shaped path through the rod, and the two V’s were in orthogonal planes so that there was minimal spatial overlap between passes. To suppress parasitic lasing, the researchers wedged antireflection-coated end faces of the amplifier rods about 1° from normal.

They initially operated the system with only the first amplifier and obtained as much as 43.5 mJ, with an energy stability of ±3 percent measured over 20,000 pulses. The beam quality from the amplifier matched that of the oscillator, with an M2 of approximately 1.5.

Figure 2. The output energy of the final amplifier, at constant input from the first amplifier, was linear with pump energy. The straight line is a theoretical prediction, and the highest three data points were obtained after realigning the system.

A final power amplifier stage, providing a double pass through another 6-mm-diameter, 20-mm-long Nd:YAG rod, boosted the output energy to as much as 68 mJ (Figure 2). The beam quality was not diminished from that of the first amplifier. The scientists calculated the overall electrical efficiency of the passively cooled system at ~6 percent.

Optics Letters, July 1, 2006, pp. 1991-1993.

An acronym of light detection and ranging, describing systems that use a light beam in place of conventional microwave beams for atmospheric monitoring, tracking and detection functions. Ladar, an acronym of laser detection and ranging, uses laser light for detection of speed, altitude, direction and range; it is often called laser radar.
altimetryBasic Sciencediode laserslidarnano-second sourcesremote spectroscopyResearch & TechnologyspectroscopyTech Pulselasers

Terms & Conditions Privacy Policy About Us Contact Us
back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2019 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA,

Photonics Media, Laurin Publishing
x Subscribe to Photonics Spectra magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.