Search Menu
Photonics Media Photonics Buyers' Guide Photonics Spectra BioPhotonics EuroPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook
More News

Could “floatovoltaics” solve the land space debate?

Facebook Twitter LinkedIn Email Comments
Marie Freebody, Contributing Editor,

Finding room for large arrays of solar panels is not always easy, especially in industrial or agricultural areas. But for Yossi Fisher, CEO of Solaris Synergy in Jerusalem, there is an obvious solution: leveraging untapped water surfaces to deploy the first floating solar power plants.

The floating concentrated photovoltaic (PV) system not only overcomes one of the key problems solar cell manufacturers face, namely the need for large tracts of land, but it also produces electricity at a lower cost compared with standard land-based photovoltaic panels. This added benefit comes thanks to the cooling effect the water has on the panels.

An artist‘s illustration of one of Solaris Synergy’s 50-kW floating solar platforms.

“The water surface doesn’t just play a role as ‘real estate’ for the system; we actively use it to obtain two major benefits,” Fisher said. “The first is cooling of the solar cells. The cells in our system are constantly kept at a low temperature (around 30 °C), thus avoiding the normal heat degradation of efficiency seen in ordinary noncooled panels. Secondly, we use the water surface as a giant, almost friction-free bearing to allow a simple and inexpensive azimuthal sun-tracking mechanism.”

Fisher believes that the issue of land availability will become a very real roadblock to widespread deployment of land-based PV systems and that putting bodies of water to good use presents a welcome option to many.

Entities that own large inland water surfaces, such as power and water utilities, and agricultural farms, particularly in the “sun belt” area around the equator, will be most suitable. This takes in most of the Middle East, southern Europe, north Africa, Central America and the southern US (California, Arizona, Nevada), in addition to areas such as India and Australia.

The depth of water that is called for is surprisingly small – typically anything greater than about 1 to 1.5 m is sufficient. As for the expanse of water required, each module size is around 2 x 2 m, which means theoretically that almost any body of water above this size could hold one of these systems. However, to reach a meaningful system output, a surface of at least 1000 square meters is required for a 100-kW system.

“A rectangular reservoir of water of a size of 100 m on a side (a fairly small reservoir) would be able to produce 1 MWp,” Fisher said. “No space around the reservoir is needed for the system, with the exception of a small space of a few square meters for the inverters and transformer housing, and small anchoring sites of one or two square meters each.”

The floating arrays are composed of standard crystalline silicon solar cells with a slight modification made to the final metallization layer. A higher metal conductor density is employed due to the use of concentrator mirrors.

A prototype of the floating concentrated photovoltaic system installed in Kibbutz Ketura, southern Israel. Images courtesy of Solaris Synergy.

“We only use a small fraction – about 5 to 8 percent – of the silicon used by other nonconcentrating systems,” Fisher said. “This allows us to use the best-performance cells we can find, without negatively impacting the cost of our system to a significant extent. In addition, due to concentration, we get a higher output than normally rated for the given cells measured at ‘one sun’ conditions.”

The current low-volume cost per installed watt is around $3, with projected costs (based on high-volume manufacturing and the attendant economies of scale) going below $1.7/Wp fully installed within three to four years.

To date, Solaris Synergy has built two prototypes in its facility in Jerusalem, plus a third prototype in a solar energy test site in Kibbutz Ketura in the Arava region. The company has signed agreements with two partners to deploy pilot projects of around 50 kW each with Israel’s national water company Mekorot/Watech and with the world’s largest utility company, France’s EDF Group. Some additional testing will take place at Cadarache in the southeast region of France.

“We hope to have these pilot projects finished within the coming year and start to deploy the first commercial systems in 2012,” Fisher said. “One of the challenges that all solar energy technology companies face is the need to prove that the technology is sufficiently mature to be bankable – this is a chasm that we have to cross.”

May 2011
Basic Scienceconcentrator mirrorscrystalline silicon solar cellsEcophotonicsEDF GroupenergyEuropeFisherFloating Concentrated PhotovoltaicGreenLightindustrialIsraelMarie FreebodyMekorot/WatechMiddle EastmirrorsopticsPVSolaris Synergysun beltYossi Fisher

back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2019 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA,

Photonics Media, Laurin Publishing
x Subscribe to EuroPhotonics magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.