Search Menu
Photonics Media Photonics Marketplace Photonics Spectra BioPhotonics EuroPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook

Edge States of Graphene Nanoribbons Discovered

Facebook Twitter LinkedIn Email Comments
BERKELEY, Calif., May 10, 2011 — Using a scanning tunneling microsope, researchers have made the first precise measurements of the "edge states" of well-ordered graphene nanoribbons.

For nearly two decades, theorists have envisioned that nanoribbons, depending on their width and the angle at which they are cut, would have unique electronic, magnetic and optical features – including bandgaps such as those in semiconductors – which sheet graphene does not have.

Graphene nanoribbons are narrow sheets of carbon atoms only one layer thick. Their width, and the angles at which the edges are cut produce a variety of electronic states, which have been studied with precision for the first time using scanning tunneling microscopy and scanning tunneling spectroscopy. (Image: Crommie et al, Berkeley Lab)

"Until now, no one has been able to test theoretical predictions regarding nanoribbon edge states because no one could figure out how to see the atomic-scale structure at the edge of a well-ordered graphene nanoribbon and how, at the same time, to measure its electronic properties within nanometers of the edge," said physicist Michael F. Crommie.

Crommie, a researcher at the US Department of Energy's Lawrence Berkeley National Laboratory's Materials Sciences Div. (MSD) and a professor of physics at the University of California, Berkeley, led the research, which included colleagues from Stanford University and other institutions. "We were able to achieve this by studying specially made nanoribbons with a scanning tunneling microscope."

The team's research not only confirms theoretical predictions, but also opens the prospect of building quick-acting, energy-efficient nanoscale devices from graphene-nanoribbon switches, spin valves and detectors, based on either electron charge or electron spin. Down the road, graphene nanoribbon edge states open the possibility of devices with tunable giant magnetoresistance and other magnetic and optical effects, the team said.

The well-tempered nanoribbon

"Making flakes and sheets of graphene has become commonplace," Crommie said, "but until now, nanoribbons produced by different techniques have exhibited, at best, a high degree of inhomogeneity" – typically resulting in disordered ribbon structures with only short stretches of straight edges appearing at random. The essential first step in detecting nanoribbon edge states is access to uniform nanoribbons with straight edges, well-ordered on the atomic scale.

Hongjie Dai, of Stanford University's Department of Chemistry and Laboratory for Advanced Materials, solved this problem with a method of "unzipping" carbon nanotubes chemically. Graphene rolled into a cylinder makes a nanotube, and when nanotubes are unzipped in this way, the slice runs straight down the length of the tube, leaving well-ordered, straight edges.

By "unzipping" carbon nanotubes, regular edges with differing chiralities can be produced between the extremes of the zigzag configuration and, at a 30° angle to it, the armchair configuration. (Image: Hongjie Dai, Stanford University, and Michael Crommie et al, Berkeley Lab)

Graphene can be wrapped at almost any angle to make a nanotube. The way the nanotube is wrapped determines the pitch, or "chiral vector," of the nanoribbon edge when the tube is unzipped. A cut straight along the outer atoms of a row of hexagons produces a zigzag edge. A cut made at a 30° angle from a zigzag edge goes through the middle of the hexagons and yields scalloped edges, known as "armchair" edges. Between these two extremes are a variety of chiral vectors describing edges stepped on the nanoscale, in which, for example, after every few hexagons a zigzag segment is added at an angle.

These subtle differences in edge structure have been predicted to produce measurably different physical properties, which potentially could be exploited in new graphene applications. Steven Louie of UC Berkeley and Berkeley Lab's MSD, with the help of postdoc Oleg Yazyev, calculated the expected outcomes, which were then tested against experiment.

Chenggang Tao of MSD and UCB led a team of graduate students in performing scanning tunneling microscopy (STM) of the nanoribbons on a gold substrate, which resolved the positions of individual atoms in the graphene nanoribbons. The team looked at more than 150 high-quality nanoribbons with different chiralities, all of which showed an unexpected feature, a regular raised border near their edges forming a hump or bevel. Once this was established as a real edge feature – not the artifact of a folded ribbon or a flattened nanotube – the chirality and electronic properties of well-ordered nanoribbon edges could be measured with confidence, and the edge regions theoretically modeled.

Electronics at the edge

"Two-dimensional graphene sheets are remarkable in how freely electrons move through them, including the fact that there's no bandgap," Crommie said. "Nanoribbons are different: Electrons can become trapped in narrow channels along the nanoribbon edges. These edge states are one-dimensional, but the electrons on one edge can still interact with the edge electrons on the other side, which causes an energy gap to open up."

Using an STM in spectroscopy mode, the team measured electronic density changes as an STM tip was moved from a nanoribbon edge inward toward its interior. Nanoribbons of different widths were examined in this way. The researchers discovered that electrons are confined to the edge of the nanoribbons, and that these nanoribbon-edge electrons exhibit a pronounced splitting in their energy levels.

"In the quantum world, electrons can be described as waves in addition to being particles," Crommie said, adding that one way to picture how different edge states arise is to imagine an electron wave that fills the length of the ribbon and diffracts off the atoms near its edge. The diffraction patterns resemble water waves coming through slits in a barrier.

A scanning tunneling microscope determines the topography and orientation of the graphene nanoribbons on the atomic scale. In spectroscopy mode, it determines changes in the density of electronic states, from the nanoribbon's interior to its edge. (Image: Crommie et al, Berkeley Lab)

For nanoribbons with an armchair edge, the diffraction pattern spans the full width of the nanoribbon; the resulting electron states are quantized in energy and extend spatially throughout the entire nanoribbon. For nanoribbons with a zigzag edge, however, the situation is different. Here, diffraction from edge atoms leads to destructive interference, causing the electron states to localize near the nanoribbon edges. Their amplitude is greatly reduced in the interior.

The energy of the electron, the width of the nanoribbon, and the chirality of its edges all naturally affect the nature and strength of these nanoribbon electronic states, an indication of the many ways the electronic properties of nanoribbons can be tuned and modified.

"The optimist says, 'Wow, look at all the ways we can control these states – this might allow a whole new technology!' Crommie said. "The pessimist says, 'Uh-oh, look at all the things that can disturb a nanoribbon's behavior – how are we ever going to achieve reproducibility on the atomic scale?'

"Meeting this challenge is a big reason for why we do research. Nanoribbons have the potential to form exciting new electronic, magnetic and optical devices at the nanoscale. We might imagine photovoltaic applications, where absorbed light leads to useful charge separation at nanoribbon edges. We might also imagine spintronics applications, where using a side-gate geometry would allow control of the spin polarization of electrons at a nanoribbon's edge.

"The edges have to be controlled. What we've shown is that it's possible to make nanoribbons with good edges and that they do, indeed, have characteristic edge states similar to what theorists had expected. This opens a whole new area of future research involving the control and characterization of graphene edges in different nanoscale geometries."

The research was published in the journal Nature Physics.

For more information, visit:
May 2011
Americasarmchair edgeBasic ScienceChenggang Taochiral vectoredge statesgraphene nanoribbonsgraphene-nanoribbon switchesHongjie DaiindustrialLawrence Berkeley National LaboratoryMichael CrommieMicroscopynanoOleg YazyevopticsResearch & Technologyscanning tunneling microscopesSensors & Detectorsspin valvesStanford UniversitySteven LouieTest & Measurementtunable giant magnetoresistancetwo-dimensional graphene sheetsUniversity of California at Berkeleyunzipping carbon nanotubesUS Department of Energy

view all
Search more than 4000 manufacturers and suppliers of photonics products and services worldwide:

back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2021 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, [email protected]

Photonics Media, Laurin Publishing
x We deliver – right to your inbox. Subscribe FREE to our newsletters.
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.