Search
Menu
Videology Industrial-Grade Cameras - Custom Embedded Cameras LB 2024

'Electronic Gridlock' Blocks Cuprates Superconductors

Facebook X LinkedIn Email
Superconductivity, the conduction of electricity with zero resistance, can sometimes seem to be stalled by a form of electronic "gridlock." A possible explanation is offered by new research at Cornell University.

The research, reported today at the American Physical Society (APS) annual meeting in Denver, concerns certain copper oxides -- known as cuprates -- that can become high-temperature superconductors, but can also, in a slightly different configuration, become stalled by the "gridlock."

Understanding how and why that transition takes place is a crucial question for cuprate superconductivity research because otherwise, the maximum temperatures for superconductivity could conceivably be much higher.

Scanning lightly hole-doped cuprate crystals with a highly precise scanning tunneling microscope (STM) has revealed strong variations in electronic structure with some copper-oxygen-copper (Cu-O-Cu) bonds distributed randomly through the crystal, apparently exhibiting "holes" where electrons are missing.

The researchers also found larger rectangular regions with missing electrons that were spaced four units of the crystal lattice apart and may represent the first direct observation of long-sought electronic "stripes" in cuprates.

Yuhki Kohsaka, a postdoctoral researcher working with J.C. Séamus Davis, Cornell professor of physics, reported on the research. A paper on the work by Kohsaka, Davis and others will appear in the March 9 edition of the journal Science.

The superconducting phenomenon was first discovered in metals cooled to less than about 4 °C above absolute zero (-273 °C, or -459 degrees °F) with liquid helium. Recently, superconductivity at much higher temperatures was discovered in cuprates.

Pure cuprates are normally insulators, but when doped with small numbers of other atoms they become superconductors at temperatures as high as 148 degrees above absolute zero (-125 °C). The impurities break up the orderly crystal structure and create "holes" where electrons should be.

At 16 percent hole-density, the cuprates display the highest temperature superconductivity of any known material. But if hole-density is reduced by just a few percent, the superconductivity vanishes precipitously and the materials become highly resistant.

Previous experiments have given evidence that long-range patterns of "stripes" of alternating high- and low-charge density, spaced four units of the crystal lattice apart, exist in doped cuprates, but no imaging technique had been able to detect them.

An STM uses an atom-sized tip that moves in atom-sized steps across a surface. When a voltage is applied between the tip and the surface, a small current known as a "tunneling current" flows between them. By adjusting the height of the tip above the surface to produce a constant current, researchers can see the shapes of individual atoms. And with the exceptional precision of the STM operated by Davis and colleagues at Cornell, the spatial arrangement of electronic states can be imaged. However, this technique has serious limitations in imaging the distribution of holes, the researchers said.

Vescent Photonics LLC - Lasers, Combs, Controls 4/15-5/15 MR

The innovation in the new research, based on a suggestion by Nobel laureate Philip W. Anderson, a professor emeritus at Princeton University, is to compare current flow in opposite directions at each point in the scan. In simple terms, at regions of the crystal containing fewer electrons (more holes), more electrons can flow down from the tip into these voids than up. The process is called TA-imaging, for tunneling asymmetry.

The Cornell researchers studied cuprate crystals in which about 10 percent of the electrons in the crystal lattice were removed and replaced by holes. The researchers imaged two cuprates with very different chemistry, crystal structure and doping characteristics and found virtually identical results, which they attribute entirely to the spatial arrangement of electrons in the crystal. The areas in which TA-imaging suggests holes exist appear to be centered on oxygen atoms within the Cu-O-Cu bond. This is what has long been expected, based on x-ray scattering studies. But the "big surprise," Davis said, "is that when you map this stuff for large distances across the surface no orderly patterns are observed. We had no picture of this before."

Perhaps even more exciting, he said, is the discovery that over larger areas the holes do appear to be arranged in patterns that are rectangular and exactly four crystal lattice spaces wide. These "nanostripes" are aligned with the crystal lattice but otherwise distributed at random.

"It's plausible that when you increase the number of holes these 'nanostripes' will combine into the orderly stripes seen in other experiments," Davis said.

A next step, he said, is to use TA-imaging on more heavily doped materials that exhibit such stripes to see if they are made up of these oxygen-centered holes. But the key challenge, he added, is to understand precisely how the process of hole localization into the patterns seen here suppresses superconductivity.

Co-authors of the paper include graduate students Curry Taylor, Kazuhiro Fujita and Andrew Schmidt of the Laboratory of Atomic and Solid State Physics at Cornell. The Cornell researchers worked in collaboration with scientists at the Université de Sherbrooke, Canada, the Universities of Tokyo and Kyoto and the National Institute of Advanced Industrial Science and Technology in Japan.

For more information, visit: www.cornell.edu

Published: March 2007
Glossary
photonics
The technology of generating and harnessing light and other forms of radiant energy whose quantum unit is the photon. The science includes light emission, transmission, deflection, amplification and detection by optical components and instruments, lasers and other light sources, fiber optics, electro-optical instrumentation, related hardware and electronics, and sophisticated systems. The range of applications of photonics extends from energy generation to detection to communications and...
American Physical SocietyAPS annual meetingBasic ScienceCornell Universityelectronic gridlockindustrialMicroscopyNews & Featuresphotonicssuperconductivityzero resistance

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.