Search Menu
Photonics Media Photonics Buyers' Guide Photonics Spectra BioPhotonics EuroPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook

Europeans Issue Report on Diffractive Optics Technology

Facebook Twitter LinkedIn Email Comments
Kathleen G. Tatterson

JENA, Germany -- The development of a step-by-step fabrication process for diffractive optical elements was announced in the final report of a European research alliance concerned with discoveries and applications in the field.

The partnership, known as the Flat Optical Element Technologies and Applications (FOTA) project, presented its summary in September at the Friedrich Schiller University Jena. The EUREKA project, a consortium of European companies, universities and governments working toward the advancement of science and industry, supported the effort. FOTA's goal is to show the feasibility of the fabrication of wavelength-scale diffractive optical elements and gratings.

According to the report, FOTA developed a process for fabricating high-spatial-frequency diffractive optical elements. These steps include electron beam writing, photolithographic grating transfer to about 0.3 µm, proportional etching in hard materials and replication in plastic materials down to approximately 0.3 µm. Project Manager Olivier Parriaux at the university said that currently no single facility can perform all of the fabrication steps and that such a capability could substantially extend the diffractive optical elements market to other fields.

In addition, the project facilitated the development of a generic line of diffractive interferometric rotation and translation encoder sensors capable of 1-nm resolution and 50-nm accuracy. Baumer Electric and the Société Genevoise des Instruments de Physique, Switzerland, produced the encoders, which use short-pitch gratings to provide more than 100,000 impulses per turn without interpolation. The technique could lead to smaller, more cost-effective sensors with 10 to 100 times greater resolution, said Parriaux. The encoders are expected to hit the market next year.

Theory to application

The report concluded with recommendations to consolidate the set of fabrication and characterization methods, as well as to further investigate the applications that could benefit from the new technologies. Parriaux said that the manufacturers and users of simple sensors and microsystems, evanescent wave biochemical sensors, and solid-state and semiconductor lasers could also benefit from the group's achievements.

Although FOTA has officially finished its work, computer interconnect efforts headed by Thomson CSF will continue through 1997.

Photonics Spectra
Dec 1996
Baumer ElectricEUREKA projectFlat Optical Element Technologies and ApplicationsFOTAResearch & TechnologySensors & DetectorsSociété Genevoise des Instruments de PhysiqueTech Pulse

back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2020 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, [email protected]

Photonics Media, Laurin Publishing
x Subscribe to Photonics Spectra magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.