Search Menu
Photonics Media Photonics Marketplace Photonics Spectra BioPhotonics EuroPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook

Excimer Lasers Print Silicon on Paper

Facebook Twitter LinkedIn Email Comments
DELFT, Netherlands, May 18, 2015 — For years, scientists have sought an alternative to silicon that possesses the same electrical properties while offering "superior printability." A replacement may not be necessary, though, as laser-printed silicon could be the answer.

Researchers at Delft University of Technology, in collaboration with the Japan Advanced Institute of Science and Technology, have developed a technique that allows silicon in the polycrystalline form used in circuitry to be produced directly on a substrate from liquid silicon ink with a single laser pulse. Previous research has involved various organic and metal-oxide ink materials, but these often lack silicon's favorable electronic properties.

The researchers coated liquid polysilane onto paper by "doctor-blading, or skimming it by a blade directly in oxygen-free environment." Next they annealed the layer with a conventional excimer laser, a type of laser often used in manufacturing smartphone displays.

"And it worked," said Delft professor Ryoichi Ishihara. "It was very simple."

Laser-printed silicon on paper.
A high-mobility polysilicon layer was directly formed on paper by coating liquid silicon and annealing it with pulsed laser light. Courtesy of R. Ishihara and M. Trifunovic/TUDelft.

The laser pulse lasted just a few tens of nanoseconds, he said, and left the paper completely intact. Testing the conductive performance, researchers found that thin-film transistors using the laser-printed layer exhibited mobilities as high as those of conventional polysilicon conductors. 

The new method also transforms the liquid silicon into polysilicon, bypassing the need for the conventional 350 °C thermal annealing step that has proved too hot for many flexible surfaces.

Numerous applications could be possible thanks to the researchers' findings.

"The process can be expanded to biomedical sensor and solar-cell areas," Ishihara said. "And [it] will also realize stretchable — and even edible — electronics."

Other applications include wearable electronics, as the new technique allows for production of fast, low-power, flexible transistors at low cost. Ishihara said he believes the future of the project, which also involves "improving the production process of the thin-film transistors to include additional non-silicon layers," could expand even further into other electronics.

The research was published in Applied Physics Letters (doi: 10.1063/1.4916998).

For more information, visit
May 2015
That branch of science involved in the study and utilization of the motion, emissions and behaviors of currents of electrical energy flowing through gases, vacuums, semiconductors and conductors, not to be confused with electrics, which deals primarily with the conduction of large currents of electricity through metals.
excimer laser
A rare-gas halide or rare-gas metal vapor laser emitting in the ultraviolet (126 to 558 nm) that operates on electronic transitions of molecules, up to that point diatomic, whose ground state is essentially repulsive. Excitation may be by E-beam or electric discharge. Lasing gases include ArCl, ArF, KrCl, KrF, XeCl and XeF.
pulsed lasersResearch & TechnologysiliconlasersDelft University of Technologyelectronicsexcimer laserJapan Advanced Institute of Science and TechnologyAsia-PacificJapanEuropeNetherlandsRyoichi Ishihara

back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2020 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, [email protected]

Photonics Media, Laurin Publishing
x We deliver – right to your inbox. Subscribe FREE to our newsletters.
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.