Search Menu
Photonics Media Photonics Marketplace Photonics Spectra BioPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook

Femtosecond Fiber Laser Ushers in New Class of Visible Sources

Facebook Twitter LinkedIn Email
Researchers from Laval University reported the development of the first fiber laser that can produce femtosecond pulses in the visible range of the electromagnetic spectrum. Fiber lasers producing ultrashort, bright visible-wavelength pulses could be useful for a variety of biomedical applications as well as other areas such as material processing.

Visible femtosecond pulses are usually obtained using complex and inherently inefficient setups. Although fiber lasers represent a promising alternative due to their ruggedness, reliability, small footprint, efficiency, lower cost, and high brightness, it hasn’t been possible, until now, to produce visible pulses with durations in the femtosecond (10−15 s) range directly with such lasers.

“Our demonstration of a femtosecond fiber laser operating in the visible spectrum paves the way for a new class of reliable, efficient, and compact ultrafast lasers,” said research team leader Réal Vallée from Université Laval in Canada.
Researchers have developed the first fiber laser that can produce femtosecond pulses in the visible range of the electromagnetic spectrum. Courtesy of Jérôme Lapointe, Université Laval.
Researchers have developed the first fiber laser that can produce femtosecond pulses in the visible range of the electromagnetic spectrum. Courtesy of Jérôme Lapointe/Université Laval.

The laser is based on a lanthanide-doped fluoride fiber and emits red light at 635 nm. It achieves compressed pulses with a duration of 168 fs, a peak power of 0.73 kW, and a repetition rate of 137 MHz. Using a commercial blue laser diode as the optical source of energy, or pump source, helped to achieve a robust, compact, and cost-efficient design.

“Provided higher energies and powers can be achieved in the near future, many applications could benefit from this type of laser,” said Marie-Pier Lord, a doctoral student involved in the project. “Potential applications include high-precision, high-quality ablation of biological tissues and two-photon excitation microscopy. Femtosecond laser pulses also allow cold ablation during material processing, a process that can make much cleaner cuts [than longer pulses] because it doesn’t produce thermal effects.”

In a fiber laser, an optical fiber doped with rare-earth elements acts as the lasing medium. Although fiber lasers are among the most simple, rugged, and reliable high-brightness laser systems, the use of silica fibers tends to limit them to the near-infrared spectral region. Vallée’s group has been working to extend the spectral range of these laser sources by using fibers made from fluoride instead of silica.

“We previously focused on developing mid-infrared fiber lasers, but recently gained interest in visible fiber lasers,” Lord said. “Although the lack of compact and efficient pump sources for such lasers hindered their development for a long time, the recent advent of semiconductor-based laser sources operating in the blue spectrum has provided a key technology for the development of efficient visible fiber lasers.”
The research team included Réal Vallée, Marie-Pier Lord and Michel Olivier as well as Martin Bernier who is not pictured. Courtesy of Jérôme Lapointe, Université Laval
The research team included Réal Vallée, Marie-Pier Lord, and Michel Olivier, as well as Martin Bernier, who is not pictured. Courtesy of Jérôme Lapointe/Université Laval.

After demonstrating fiber lasers that emit visible wavelengths continuously, the researchers wanted to extend the advancement to ultrafast pulsed sources. Thanks to the refinement in the fabrication process of fluoride fibers, it’s now possible to obtain lanthanide-doped fibers with properties essential for the development of efficient visible fiber lasers.

The new pulsed fiber laser developed by Vallée’s team combines a lanthanide-doped fluoride fiber with a commercially available blue diode pump laser. To create and maintain a pulsed output, the researchers also had to figure out how to carefully manage the light polarization in the fiber.

“The development of a laser at a new wavelength, where the material properties of the optical components are different than those used previously, can sometimes be tricky,” co-author Michel Olivier said. “However, our experiments showed that the performance of our laser was in excellent agreement with our simulations. This confirmed that the system was well behaved and understood, and that the important parameters of the system were characterized properly and well adapted for pulsed lasers, especially the properties of the optical fiber that we used.”

Next, the researchers would like to improve the technology by making the setup completely monolithic, meaning that the individual fiber-pigtailed optical components would all be directly bonded to each other. This would reduce the setup’s optical losses, improve efficiency, and make the laser more reliable, compact, and robust. They are also investigating different avenues to improve the laser’s pulse energy, pulse duration, and average power.

The research was published in Optics Letters (

Photonics Spectra
Sep 2023
Research & Technologylasersfemtosecondfiber lasersmaterialsfluoridesilicavisiblewavelengthAmericasOptics LettersLaval UniversityUniversité LavalCanadaTechnology News

back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2023 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, [email protected]

Photonics Media, Laurin Publishing
x Subscribe to Photonics Spectra magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.