Search Menu
Photonics Media Photonics Marketplace Photonics Spectra BioPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook

Fiber Sensor Detects Trace Amounts of Explosives

Facebook Twitter LinkedIn Email
ADELAIDE, Australia, May 9, 2014 — A small optical fiber sensor detects explosives in concentrations as low as 6.3 ppm, which could mean big things in the fight against terrorism.

A team from the University of Adelaide, in collaboration with the Australian Defense Science and Technology Organization, has developed a fluorescent conjugated polymer that emits red light when illuminated by a green laser. The presence of explosives is detected by the reduction in the amount of red light emitted, with analysis time totaling only a few minutes.

Inner walls of a suspended core fiber. The inset shows a wide-angle view of the same fiber. Courtesy of Sensors and Actuators B: Chemical.

“Traditionally, explosives detection has involved looking for metals that encase them such as in land mines," said Dr. Georgios Tsiminis of the university's Institute for Photonics and Advanced Sensing, an Australian Research Council Super Science Fellow and a lead researcher in this study. “In today's world, however, homemade improvised explosive devices will often have no metal in them, so we need to be able to detect the explosive material itself.”

In the study, the researchers created three small holes at the core of optical fibers coated with a thin layer of polymer. Explosives samples were then drawn through the fiber holes by capillary action, enabling the measurement of red light emitted.

“This has high sensitivity and we can detect tiny quantities of an explosive in a small sample,” Tsiminis said. “And not only do we know if explosives are there, we can quantify the amount of explosive by looking at how the light emission changes over time.”

A separate study by Brigham Young University researchers has similar military and security implications. Using data from Lawrence Livermore National Laboratory, that group developed a model that can distinguish nuclear weapons material in every pixel of an image taken with a LWIR camera. 

The Adelaide fiber sensor could be used in forensics investigations that involve potential explosives.

“It requires very little explosives present so is very sensitive,” Tsiminis said. “So forensic investigators would be able to take swabs from various surfaces, place them in some organic solvent and within a few minutes, know if there have been explosives present.”

The research is published in Sensors and Actuators B: Chemical (doi: 10.1016/j.snb.2014.03.031). 

For more information, visit:
May 2014
AustraliaAustralian Research CouncildefenseEuropeexplosivesfiber opticsforensicsglass fibersInstitute for Photonics and Advanced Sensinglight sourcesopticsResearch & TechnologyTech PulseUniversity of AdelaideAustralian Defense Science and Technology Organizationoptical fiber sensorDr. Georgios TsiminisScience Fellowcapillary actionlasers

back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2023 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, [email protected]

Photonics Media, Laurin Publishing
x We deliver – right to your inbox. Subscribe FREE to our newsletters.
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.