Search Menu
Photonics Media Photonics Buyers' Guide Photonics EDU Photonics Spectra BioPhotonics EuroPhotonics Industrial Photonics Photonics Showcase Photonics ProdSpec Photonics Handbook
More News
Email Facebook Twitter Google+ LinkedIn Comments

Fiber and Laser Unite in Restoration Effort

Photonics Spectra
Mar 1998
Ruth A. Mendonsa

The French, rightfully proud of their architectural heritage, spend about $8.6 million a year on high-technology restoration work, and 20 percent of that money is used to clean historic buildings using environmentally friendly techniques. Cleaning stone with lasers is an expensive undertaking and usually involves transporting heavy, cumbersome laboratory equipment to the site. Thanks to a European research project called Brite Euram, a laser system has been developed that is compact and lightweight, and saves time and money.

The system, manufactured by Quantel, is called Lama for a French acronym meaning portable laser for cleaning facades and historic buildings. It comprises two modules, a self-contained cooling system and a power supply unit with an Nd:YAG laser source that operates in Q-switched mode at 1064 nm. A 36-foot-long cord protects four optical fibers that feed the laser light to a handpiece that weighs less than 3 pounds and is the size of a camcorder.

Unlike the traditional bulky lasers used to restore architecture, the Lama laser delivers its light via fiber optics to a 3-lb handpiece. On a stone portico (above), the right-hand section was cleaned by microsanding, while the left and central sections were cleaned with the Lama laser, preserving the stone's yellow patina.
Cheaper, more efficient

The laser's mean output power is 20 W compared with 3 to 15 W for other available systems. The company says that because the speed of cleaning is proportional to the mean output power, Lama is seven to nine times more efficient and the cleaned square foot is much cheaper than with previous systems.

The laser system's optical fibers are key to its success. Not only do the fibers provide greater maneuverability than lab lasers outfitted with an articulated arm, but the beam delivered through the fiber achieves a spatially flat, rather than Gaussian, profile. With a Gaussian profile the difference in intensity between the center and the edge of the beam can lead to a damaged substrate. With a flat profile the cleaning action is completely even and all of the available energy is used.

The dark-colored stains absorb the 350-mJ maximum light energy. They are then vaporized into a rapidly expanding ionized gas. The resulting shock wave removes the remainder of the stain by mechanical action. The 10-ns pulses prevent the heat from diffusing into the substrate.

Double threshold

This technique has a double threshold: Below the lower level of energy intensity the laser light has no effect on the stains; above the upper intensity level it can deteriorate the substrate. In the working window between these two levels, the effect of the laser is self-limiting. Once the stain is removed, the continuing laser pulses do not damage the material's surface, and the stone retains its patina, which forms a protective coating.

Although the cost of laser cleaning is still about $30 per square foot, the project managers believe widespread use of the Lama system could bring the price down to $8 per square foot.

Accent on ApplicationsApplicationsfiber opticslasers

Terms & Conditions Privacy Policy About Us Contact Us
back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2018 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA,

Photonics Media, Laurin Publishing
x Subscribe to Photonics Spectra magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.