Search Menu
Photonics Media Photonics Marketplace Photonics Spectra BioPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook

Fluorescent Hybrid Changes Color with Polarization

Facebook Twitter LinkedIn Email
A fluorescent hybrid material that changes color based on light polarization could enhance a number of applications in nanotechnologies.

Creating this material required a host inorganic material of crystalline structure with parallel nanochannels and pore size of less than 1 nm, as well as two dyes of similar size and shape with complementary optical properties that would respond differently when stimulated by light.

Researchers from the Molecular Spectroscopy Group at the UPV/EHU University of the Basque Country, in collaboration with the Institute of Catalysis and Petroleum Chemistry of the Spanish National Research Council, used an aluminophosphate (AIPO-11) host material and the dyes pyronin, featuring green fluorescence, and acridine, with blue fluorescence.

At left, a chromaticity diagram characterizes the colors. Green emission obtained using linearly polarized light along the channels, shown at top right. Blue emission obtained using light linearly perpendicular to the channels, shown at bottom right. The arrows indicate the direction in the polarization of the light used. Courtesy of UPV/EHU Molecular Spectroscopy Group.

“The dyes enter in order, they align themselves along the nanochannels, and their fluorescent properties are improved in them,” said researcher Virginia Martinez. She said this improvement was prompted by the dyes’ restricted molecular flexibility and separate inclusion into the channel.

In the experiment, pyronin was inserted first, creating a highly luminescent material. The researchers then incorporated that with the acridine into a synthesis process, which produced rectangular crystals of 30 µm×20 µm. This allowed the colors to change based on the light’s polarization — along the channel it appeared green, while perpendicularly it displayed blue — and indicated that energy was transferring between the dyes.

“The tuning of color is an instantaneous, efficient process that can be fully reversed and reproduced with high resistance to fatigue,” said Iñigo López-Arbeloa, a researcher with the group.

The synthesis process was fundamental to the work, the researchers said. Unlike traditional photoactive hybrid materials, in which the organic part is inserted into the inorganic part from the gas or liquid phase by diffusion, the new method included insertion of the dyes into a gel with which the inorganic material is synthesized. As the crystal grew, the organic chromophore was gradually incorporated.

The research is published in ACS Photonics (doi: 10.1021/ph4000604).

Photonics Spectra
Jul 2014
A naturally occurring pigment in tissue that may selectively absorb certain wavelengths and can be used to aid in targeting the beam in laser surgery.
photovoltaic cell
Also known as a self-generating barrier layer cell. A photoelectric detector that converts radiant flux directly into electrical current. Generally, it consists of a thin silver film on a semiconductor layer deposited on an iron substrate.
AcridineAmericaschromophoreCSICEuro NewsEuropenanonanochannelsnanotechnologiesopticsphotovoltaic cellResearch & TechnologySpainSpanish National Research CouncilTech Pulsebiomedical systemsMolecular Spectroscopy GroupUPV/EHU University of the Basque CountryInstitute of Catalysis and Petroleum Chemistryaluminophosphatepyronin

back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2023 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, [email protected]

Photonics Media, Laurin Publishing
x Subscribe to Photonics Spectra magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.