Search Menu
Photonics Media Photonics Buyers' Guide Photonics EDU Photonics Spectra BioPhotonics EuroPhotonics Industrial Photonics Photonics Showcase Photonics ProdSpec Photonics Handbook
More News
Email Facebook Twitter Google+ LinkedIn Comments

Gentle Handling for Unnecessary Roughness

Photonics Spectra
May 2001
Brent D. Johnson

Rogers Corp. develops high-performance specialty materials for telecommunications electronics. The company's primary application is laminating copper foil to various dielectric substrates to insulate the layers on circuit boards. Ensuring a uniform roughness value is the key to making dielectric layers that insulate without impeding circuit performance. Process control is critical.

Scott Kennedy, development engineer, said the company used to analyze surfaces with a portable stylus profilometer. Although it was easy to use, it took a long time, he said. It also required contact, acting like a needle point that is dragged across the surface of the substrate. As the profilometer encountered surface changes, fluctuations in current indicated defects. However, these devices can damage fragile surfaces such as copper foil or plastics.

Another alternative was interferometric surface characterization, which provided even more detail but at a higher cost and required several days for analysis.

Now the Lasercheck handheld surface-roughness measurement gauge from Optical Dimensions LLC is improving Rogers' online surface analysis. The instrument uses a 660-nm diode laser to reflect light from the surface of the test material. The scattered light hits a photodiode array detector, whose elements are arranged to measure the angle and intensity of the beam. Two isolated photodiodes measure roughness contributions from surface spatial wavelengths in nearly the same bandwidth region that is measured by a mechanical profiler, the baseline instrument.

A significant benefit of the Lasercheck is that it requires no contact with a surface. Kennedy said it is easy to use, is portable and enables data-logging. "We can get immediate results and many more measurements," he said.

The device is not perfect, he added, noting that the operator must calibrate it separately for each surface; e.g., settings differ for measuring a ground or honed surface.

Accent on ApplicationsApplicationsCommunicationshigh-performance specialty materialsSensors & Detectors

Terms & Conditions Privacy Policy About Us Contact Us
back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2018 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA,

Photonics Media, Laurin Publishing
x Subscribe to Photonics Spectra magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.