Search Menu
Photonics Media Photonics Marketplace Photonics Spectra BioPhotonics EuroPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook

Growing inexpensive silicon microwires

Facebook Twitter LinkedIn Email Comments
A new, simpler process has been developed that turns silicon into precisely sized and spaced microwires with the potential for practical commercial applications such as solar cells, transistors, integrated circuits, sensors and batteries.

Researchers from MIT and Pennsylvania State University have developed a technique for producing the microwires in a highly controlled way that could be scaled up for industrial processes. Unlike previous methods, this one not only provides control over size and spacing but also has the potential to be rendered on any curved three-dimensional surface.

The method involves heating and intentionally contaminating the surface of a silicon wafer with copper, which would diffuse into silicon. While the silicon slowly cools, the copper diffuses out, forming droplets on the surface. When the wafer is placed into an atmosphere of silicon tetrachloride gas, silicon microwires begin to grow outward wherever copper droplets are present on the surface. Silicon in the gas dissolves into the copper droplets and precipitates out onto the silicon surface below. The silicon buildup elongates, forming microwires ranging from 10 to 20 μm in diameter.

The spacing of the wires was controlled with textures created on the wafer’s surface – tiny dimples that form centers for the copper droplets – while the temperature used for the diffusion process controlled the size of the wires. Unlike other production methods, the size and spacing of the wires can be controlled independently.

The small size of the microwires, which have the potential to reach conversion efficiencies that are close to those of conventional solar cells, could also reduce costs by using smaller amounts of expensive silicon.

The findings appeared in Small, Jan. 25, 2011 (doi: 10.1002/smll.201002250), and the researchers said they still are determining the best combinations of temperature profiles, copper concentrations and surface patterning for various applications.

The work was supported by the US Department of Energy, the Chesonis Family Foundation and the National Science Foundation.

Photonics Spectra
Apr 2011
3-D surfacesAmericasbatteriescopperenergyenvironmental monitoringimagingindustrialintegrated circuitsMassachusetts Institute of TechnologyMITPenn StateResearch & TechnologySensors & Detectorssilicon crystal waferssilicon microwiressilicon tetrachloride gassilicon wafersolar cellsTech Pulsetransistors

view all
Search more than 4000 manufacturers and suppliers of photonics products and services worldwide:

back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2021 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, [email protected]

Photonics Media, Laurin Publishing
x Subscribe to Photonics Spectra magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.