Search
Menu
Hamamatsu Corp. - Earth Innovations LB 2/24

High-Power Pulsed Laser Diodes Take on New Industrial and Commercial Applications

Facebook X LinkedIn Email
Paul Rainbow, Laser Components Canada Inc.

The ability of pulsed laser diodes to provide short pulses of intense power has made them an ideal choice for military applications such as target designating and rangefinding. Indeed, much of the historical motivation for developing these diodes has military roots. However, today’s technology improvements and cost reductions are opening new applications in metrology and medicine. Inexpensive laser diodes that can generate 200-ns pulses with up to 120 W of peak power are readily available in the marketplace.

Continuous vs. pulsed operation

Standard laser diodes are designed to emit CW radiation with power from a few milliwatts to a few watts. Heat removal and laser-threshold minimization are important considerations. As a result, these devices usually are long enough to ensure effective heat removal over their length and are often mounted on a highly thermal-conductive diamond substrate. A pulsed laser, on the other hand, operates at a lower duty cycle, so heat removal is less of an issue. And the high population inversions obtained make minimizing incidental resonator losses — that is, lowering threshold — relatively unimportant. So a pulsed laser design might feature a short resonator mounted directly to the base of a TO-type housing.

Another design difference between pulsed and CW lasers is that the reflectivity of the pulsed laser’s output facet is generally much lower. The lower gain generated in a CW laser requires a lower value of output coupling to achieve threshold in the first place and to maximize efficiency after that. The instantaneous high gain in a pulsed laser makes threshold considerations inconsequential, and a high value of output coupling facilitates quick draining of photons out of the resonator — that is, shorter pulses. Of course, the high peak power in a pulsed laser can damage the output facet if appropriate precautions are not taken.

Thresholds are kept low on typical CW lasers by limiting the emitting width to 5 to 35 μm. Although laser threshold current is directly proportional to this width, the high gain generated in pulsed lasers allows the width to be increased up to 400 μm with a corresponding increase in peak power. Unfortunately, without precautions, this combination of width and a short resonator at high gain can result in rotating modes in which the circulating power bounces obliquely around inside the gain region rather than straight back and forth between the end facets.

Another factor that affects threshold is that the structure of the pulsed laser is generally configured to provide a beam divergence of less than 25°, compared with the typical CW device that would provide 35° to 45°. The tighter beam is achieved by allowing photons to spread into a “large optical cavity,” a weaker waveguide in the transverse direction that reduces the quantity of photons in the gain region. Because no lateral waveguide is built into the pulsed-laser structure, the beam divergence in this direction is typically 10°.

Pulsed laser diodes are designed to be driven with high-current pulses, producing short, high-power optical pulses. To achieve the very high peak optical powers demanded by most applications, the duty cycle is generally kept below 0.1 percent. This means that a 100-ns optical pulse is followed by a pause of 100 μs; i.e., very short pulses are available with repetition rates in the kilohertz range. The maximum pulse lengths are typically in the 200-ns range; more common are pulses between 3 and 50 ns. These pulses have sufficient peak power for most applications but still meet the stringent, Class 1 eye-safety standard.

Electric currents on the order of several tens of amperes are necessary to create these optical pulses. Such high current levels require fast switching transistors and appropriate circuitry, with all electrical connections kept as short as possible to reduce inductive losses.

So while benefiting from the progress made in CW laser technology, pulsed lasers have been optimized to offer high performance in their unique applications and to facilitate economical production.

Wavelength and eye safety

When the first commercial GaAs pulsed lasers became available, their wavelength was 905 nm. Fortunately, this is close to the peak responsivity of silicon detectors, and there is a nearby water absorption peak, which reduces ambient light and increases detection sensitivity. With the advent of new technology and lasers based on different semiconductor materials, it became feasible to produce lasers with a variety of wavelengths. However, devices produced at 905 nm have until recently maintained their pre-eminent position for pulsed applications.

But lasers operating in the 1550-nm range have been receiving more attention because of their superior transmission through fog and smoke. Another distinct advantage is that this wavelength is less hazardous to vision than shorter ones. Although not “eye safe” — a designation applied to lasers whose radiation isn’t transmitted through the cornea — wavelengths longer than 1500 nm are focused behind the retina, rather than directly onto it, and therefore are classified as less hazardous under the prevailing eye-safety standard, ANSI Z136.1-2000.

Meadowlark Optics - Building system MR 7/23

Time of flight, other functions

Many applications for pulsed laser diodes are variants of the seminal rangefinding application, in which target distances are calculated by measuring the flight time of laser pulses reflected or backscattered from the target. Using this principle, some of the more sophisticated instruments can make accurate measurements at distances up to 10 km. Police laser “speed guns,” for example, can measure vehicle speed up to 155 mph (250 km/h) at up to 3300 ft (1000 m) with an accuracy of 1 to 3 percent. Unlike conventional radio-frequency speed guns, which measure velocity directly from the magnitude of the Doppler shift in a reflected signal, laser speed guns calculate velocity by comparing distance measurements made at different times.

Since prices came down, eye-safe rangefinders have become available for a variety of recreational activities. Hunters, for example, can buy laser rangefinding devices to measure the distance to their targets with an accuracy of a meter or two over a range of hundreds of meters. Although the deer in the hunter’s sights may have other things to worry about, it need not be concerned about eye safety because the laser conforms to Class 1 standards.

LaserComponents_figure4.jpg
Pulsed laser diodes provide the optical signal in automotive collision-avoidance systems.

Similarly, golfers can purchase inexpensive laser rangefinders to try to improve their handicaps. In what some (but not all) might consider a less frivolous application, automotive engineers are developing rangefinders based on pulsed laser diodes, to warn drivers of hazards. Laser range sensors are also widely used as navigational aids for ships, particularly in ports and harbors; in ceilometers for cloud-base measurement at airports; and in surveying and construction.

In a laser safety scanner, pulsed laser diodes create a curtain of light around potentially dangerous areas such as automated production lines. Using coded pulse emission, two-dimensional curtains can be monitored to distinguish between allowed and not-allowed shapes. The high peak power from pulsed laser diodes, when used in combination with avalanche photodiodes, provides the sensitivity necessary to discriminate between shapes. Besides serving as a safety interface, such equipment may also provide remote management and diagnostic functions. Increasingly, similar systems are being deployed on intelligent highways to regulate flow and to identify vehicles at tollbooths.

In addition, significant research supports the dramatic wound-healing ability of pulsed laser diodes in medical applications such as laser acupuncture and therapy. Wavelengths in the spectral range of 625 to 905 nm are favored here. The latter wavelength penetrates deeply into tissue and bone to alleviate pain, swelling and inflammation in joints, as well as other afflictions. The laser light must be pulsed to achieve the power necessary for penetration and absorption without damaging the cells. Known as low-level laser therapy, the light energy is thought to stimulate the flow of oxygen to the affected areas.

Use determines reliability

As with other light sources, and diode lasers in particular, the lifetime of a pulsed laser is highly dependent on operating conditions. The devices can be subjected to significant overdrive for short periods without damage. Damage is also avoided if the pulse energy is reduced by employing pulse durations as short as 2 ns. The engineer applying a laser has to choose the appropriate device and drive conditions to suit the application and the operating lifetime required. Whereas lifetimes of less than an hour are enough for certain military applications such as thyristor ignition, industrial safety scanners in three-shift environments must run reliably for tens of thousands of hours (see box).

TABLE_Page-108.jpgGeneration of short, powerful pulses using laser diodes represents an enabling technology for a variety of applications that cannot be addressed with CW laser diodes, for either technical or economic reasons. Laser Components and other manufacturers have developed commercial products and offer devices at 850, 905 and 1550 nm for such applications with a wide range of output powers and emitting areas, both as single emitters and as stacked devices.

Meet the author

Paul Rainbow is general manager/president of Laser Components Canada Inc.; e-mail: mailto:%[email protected]

Published: October 2004
Glossary
metrology
Metrology is the science and practice of measurement. It encompasses the theoretical and practical aspects of measurement, including the development of measurement standards, techniques, and instruments, as well as the application of measurement principles in various fields. The primary objectives of metrology are to ensure accuracy, reliability, and consistency in measurements and to establish traceability to recognized standards. Metrology plays a crucial role in science, industry,...
defenseFeaturesindustrialmedicinemetrologyPulsed Laser DiodesSensors & Detectors

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.