Search
Menu
Videology Industrial-Grade Cameras - Custom Embedded Cameras LB 2024

It’s a terascale world after all

Facebook X LinkedIn Email
Melinda Rose, [email protected]

Using high-resolution optical lithography techniques that are important in microelectronics fabrication, researchers in Belgium have produced a terascale world map with a circumference of only 40 µm, or about half the width of a human hair.

With CMOS fabrication tools, scientists at the Photonics Research Group, a laboratory of Ghent University that is associated with the Interuniversity Microelectronics Center (IMEC), put the map in a corner of an optical silicon chip designed for one of the group’s research projects on nanophotonic integrated circuits. The world map was defined on a silicon photonics test chip in IMEC’s cleanroom for 200-mm processing.


The small map is viewed through a scanning electron microscope. Images ©Photonics Research Group-University of Ghent 2009.

The smallest features resolved on the map are about 100 nm, a size that is still several times larger than today’s state-of-the-art transistors. However, the scale reduction enables more complex optical functions on a single chip for applications in telecommunications, high-speed computing, biotechnology and health care, the researchers said.

The fabrication process consisted of 30 steps, including layer depositions and chemical etching on a silicon-on-insulator wafer. Four different layer thicknesses were resolved, and these corresponded to four different images, or mask layers, that had to be patterned separately.

Meadowlark Optics - Building system MR 7/23


The terascale world map, created using high-resolution optical lithography techniques, is hidden in the bottom right corner of a photonic chip.

The silicon photonic technology developed with these chips integrates optical circuits onto a small chip: Light can be manipulated on a submicrometer scale in tiny strips of silicon called waveguides or photonic wires, which means that these silicon photonic circuits can pack a million times more components into the same space than today’s commercial glass-based photonics can.

The circuits developed on this chip were used to demonstrate photonic wires with the lowest propagation losses, the researchers said. Also, structures were developed to improve the efficiency of coupling light from the outside world, as with an optical fiber, to the wires on a chip.


The small map is viewed through an optical microscope. The different colors are caused by interference effects in the different layer thicknesses of silicon.

Located in Leuven, Belgium, the Photonics Research Group works to build on technologies developed for the microelectronics industry to create smart photonic chips for health care, communications, identification and biosciences.

Published: February 2010
Glossary
lithography
Lithography is a key process used in microfabrication and semiconductor manufacturing to create intricate patterns on the surface of substrates, typically silicon wafers. It involves the transfer of a desired pattern onto a photosensitive material called a resist, which is coated onto the substrate. The resist is then selectively exposed to light or other radiation using a mask or reticle that contains the pattern of interest. The lithography process can be broadly categorized into several...
nano
An SI prefix meaning one billionth (10-9). Nano can also be used to indicate the study of atoms, molecules and other structures and particles on the nanometer scale. Nano-optics (also referred to as nanophotonics), for example, is the study of how light and light-matter interactions behave on the nanometer scale. See nanophotonics.
optical fiber
Optical fiber is a thin, flexible, transparent strand or filament made of glass or plastic used for transmitting light signals over long distances with minimal loss of signal quality. It serves as a medium for conveying information in the form of light pulses, typically in the realm of telecommunications, networking, and data transmission. The core of an optical fiber is the central region through which light travels. It is surrounded by a cladding layer that has a lower refractive index than...
Belgiumbiotechnologychemical etchingCMOSCommunicationsEuro NewsEuropeGhent Universityhealth carehigh-speed computingIMECindustrialInteruniversity Microelectronics Centerlayer depositionLeuvenlithographyMelinda RosemicroelectronicsMicroscopynanonanophotonic integrated circuitsNewsoptical circuitsoptical fiberoptical lithographyoptical silicon chipOpticsphotonic wiresPhotonics Research Groupsilicon chipsilicon photonicssilicon-on-insulator wafertelecommunicationsterascaleWaferswaveguidesworld map

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.