Search
Menu
Hamamatsu Corp. - Earth Innovations LB 2/24

Joining Optical Components with Silica Nanoparticles

Facebook X LinkedIn Email
Lynn M. Savage

Assembling optical components requires some type of bonding mechanism, often using epoxies, glass frits or other materials to join two or more pieces. No matter what type of bonding material or process is used, however, there often are limitations to overcome, such as high temperature requirements, low reliability or strength of the bond, and subpar optical properties of the interface between the bond and the component.

Now researchers affiliated with Stanford University and with Lawrence Berkeley National Laboratory, both in California, have developed a novel bonding process that utilizes sol-gel chemistry techniques and silica nanoparticles to overcome many typical hurdles.

Steven Chu, the director of the lab, and his associate, Sanjeevi Sivasankar, based their process on the existing technique of hydroxide catalysis. In this process, an alkaline solution such as sodium silicate binds two surfaces by etching them and forming siloxane chains between them. According to Chu and Sivasankar, however, this form of bonding has low reproducibility and can be used only on components with high surface flatness and cleanliness.

In standard hydroxide catalysis, two surfaces are bonded by introducing them to a solution that hydroxylates them, causing short siloxane chains to protrude. If the surfaces are perfectly flat, a tight chemical bond forms. However, because most optical surfaces are not perfectly flat, something is needed to fill the gaps and to strengthen the bond.

The scientists suspended 5- and 7-nm silica particles in a KOH solution at concentrations of 15, 18 or 21 percent weight/volume. They placed the particles and bonding solution on soda-lime glass slides and monitored the curing process. As the interface dehydrated, the silica nanoparticles filled the gaps between the siloxane chains and polymerized into highly branched, three-dimensional networks.


Cognex Corp. - Smart Sensor 3-24 GIF MR
The researchers found that, when the ratio of hydroxide to silica was 0.35, the soda-lime glass slides bonded successfully every time. “The chemistry of the nanoparticle-mediated bonding will work with any material that has silica or SiOH groups on its surface,” Sivasankar said.

They also found that increasing the initial pH or decreasing the nanoparticle concentration enabled them to lengthen the curing rate, which would aid optical alignment during the curing process. The bond strength increased from 0.2 MPa after 1 h to 8.5 MPa after 120 h to 14 MPa after 300 h and, on average, slides bonded with silica nanoparticles showed only a few small bonding defects, mostly along the edges (see figure).

NanoBond_Horizontal.jpg
Bright-field microscopy images show soda-lime glass slides bonded using a nanoparticle-mediated technique (A) and a standard silicate bonding technique (B). Slides bonded using silica nanoparticles were nearly free of defects, with most of the existing defects appearing along the edges. Slides attached using the silicate bonding method had more — and larger — defects, although none along the edges. Reprinted with permission of the American Chemical Society.

According to Sivasankar, the method produces bonds that are thicker than optical contacting and direct sol-gel bonding, making it less suitable for optical systems with low mechanical dissipation, such as gravitational wave detectors.

Nano Letters, October 2007, pp. 3031-3034.


Published: November 2007
Glossary
nano
An SI prefix meaning one billionth (10-9). Nano can also be used to indicate the study of atoms, molecules and other structures and particles on the nanometer scale. Nano-optics (also referred to as nanophotonics), for example, is the study of how light and light-matter interactions behave on the nanometer scale. See nanophotonics.
photonics
The technology of generating and harnessing light and other forms of radiant energy whose quantum unit is the photon. The science includes light emission, transmission, deflection, amplification and detection by optical components and instruments, lasers and other light sources, fiber optics, electro-optical instrumentation, related hardware and electronics, and sophisticated systems. The range of applications of photonics extends from energy generation to detection to communications and...
Basic Sciencebonding mechanismepoxiesFeaturesMicroscopynanooptical componentsphotonicsSensors & Detectors

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.