Search Menu
Photonics Media Photonics Marketplace Photonics Spectra BioPhotonics EuroPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook

Laser rulers join the planet hunt

Facebook Twitter LinkedIn Email Comments
Ashley N. Paddock, [email protected]

Astronomers searching for extrasolar planets may be a step closer to finding other Earth-like places in the universe around sunlike stars, thanks to a new tool that promises to increase the accuracy of planet-hunting devices by tenfold.

Scientists from the Max Planck Institute of Quantum Optics, in collaboration with the European Southern Observatory (ESO), the Instituto de Astrofisica de Canarias and Menlo Systems GmbH, have modified the laser frequency comb technique so that it can be applied for the calibration of astronomical spectrographs. Laser frequency combs are calibration tools designed to precisely measure “wobble” in stars.

The researchers successfully tested the instrument with the High Accuracy Radial velocity Planet Searcher (HARPS), a spectrograph at the 3.6-m telescope at La Silla Observatory in Chile. They achieved a tenfold improvement in precision over traditional spectral lamp calibrators, which will significantly enhance the chances of discovering Earth-like planets outside our solar system. This modification could help astronomers determine whether our solar system is the only place in the universe that provides the conditions needed for life as we know it.

Even with the largest telescopes, these types of planets cannot be imaged directly. Measuring the tiny Doppler shifts, or wobble, in the spectrum of a parent star – resulting from the recoiling motion caused by the planet – is the most successful detection method to date. The light that reaches us from distant stars is composed of multiple spectral lines that are characteristic of the different chemical elements in the star’s gas atmosphere. When the star is moving toward or away from the observer, these lines shift slightly to higher or lower frequencies.

Use of Doppler shift measurements in the search for extrasolar planets. When a planet (red ball) orbits a star (yellow ball), the recoil it exerts gives rise to a periodic movement: At one time the star is moving toward the observer (above), and the light waves appear to be squeezed. This means the radiation is shifted toward higher frequencies, which is called a “blueshift.” If, on the other hand, the star is traveling awayfrom the observer (see below), the waves seem to be stretched, resulting in a so-called “redshift” toward lower frequencies. Courtesy of Th. Udem, MPQ.

By measuring the Doppler shifts, astronomers can obtain information about the star’s movement. This provides a promising way of locating extrasolar planets that reveal their identity only indirectly: While traveling around their central star, they push and pull it a little bit, causing a relatively small change in its velocity. For this reason, the amount of Doppler shift in the star’s spectrum is very small and can be detected only with the help of high-precision measurement tools.

Unfortunately, adapting laser frequency combs for astronomical spectroscopy applications has posed a few major technical challenges. Even precision spectrographs such as HARPS provide limited frequency resolution – typically around 105. This means that the lines of the frequency comb would have to be spaced at intervals of more than 10 GHz or it would not be able to resolve them. Another challenge is that astronomical spectrographs operate in the visible spectral region.

To overcome these challenges, the researchers chose a fiber laser system as the basis of the frequency comb. These systems emit light in the infrared region and have spectral distances of a few hundred megahertz. The scientists changed these properties, however, by implementing a cascade of several spectral filters and using advanced fibers developed by Philip Russell of Max Planck Institute for the Science of Light in Erlangen. The result was a frequency comb with the desired mode spacing and a broad spectrum in the visible range.

When calibrated with the HARPS spectrograph, the modified frequency comb delivered 2.5-cm/s sensitivity for velocity changes. This was demonstrated in a series of measurements taken in November 2010 and January 2011.

Next, the researchers plan to pursue a task even more challenging than looking for planets. Astronomical observations have shown that the universe is not static but rather expanding continuously. New results on the microwave background radiation and the observation of supernovae suggest that this expansion is accelerating over time. However, the change of the velocity is expected to be very small, on the order of 1 cm/s annually. This precision is expected to be delivered by the next ESO project, the European Extremely Large Telescope, which is planned for construction in Chile in the next decade. High-precision frequency combs will be at the heart of its Codex spectrograph, providing a calibration precision of one part per 300 billion – a feat equivalent to measuring the circumference of the Earth to half a millimeter.

The findings appeared in Nature (doi: 10.1038/nature11092).

For more information, see “Star Comb Joins Quest for Other Earths,”

Photonics Spectra
Aug 2012
astronomical spectrograph
An instrument that photographs the spectra of an extraterrestrial object.
doppler shift
The magnitude, expressed in cycles per second, of the alteration of the wave frequency observed as a result of the Doppler effect.
The technology of generating and harnessing light and other forms of radiant energy whose quantum unit is the photon. The science includes light emission, transmission, deflection, amplification and detection by optical components and instruments, lasers and other light sources, fiber optics, electro-optical instrumentation, related hardware and electronics, and sophisticated systems. The range of applications of photonics extends from energy generation to detection to communications and...
An optical instrument for forming the spectrum of a light source and recording it on a film. The dispersing medium may be a prism or a diffraction grating. A concave grating requires no other means to form a sharp image of the slit on the film, but a plane grating or a prism requires auxiliary lenses or concave mirrors to act as image-forming means in addition to the dispersing element. Refracting prisms can be used only in parallel light, so a collimating lens is required before the prism and...
An afocal optical device made up of lenses or mirrors, usually with a magnification greater than unity, that renders distant objects more distinct, by enlarging their images on the retina.
Americasastronomical spectrographChileCodex spectrographDoppler shiftE-ELTenergyEuropeEuropean Extremely Large TelescopeEuropean Southern Observatoryextrasolar planetsfiber lasersGermanyHARPShigh accuracy radial velocity planet searcherimagingInstituto de Astrofisicia de CanariasLa Silla Observatorylaser frequency combMax Planck Institute for the Science of LightMax Planck Institute of Quantum OpticsMenlo Systems GmbHPhilip Russellphotonicsplanet huntingResearch & Technologysolar systemspectral lamp calibrationspectrographstar wobbleTech Pulsetelescopelasers

back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2020 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, [email protected]

Photonics Media, Laurin Publishing
x Subscribe to Photonics Spectra magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.