Search Menu
Photonics Media Photonics Buyers' Guide Photonics Spectra BioPhotonics EuroPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook
More News

Laser welding: Coming to an OR near you

Facebook Twitter LinkedIn Email Comments
Compiled by EuroPhotonics staff

Instead of sewing up wounds, doctors soon could “weld” them shut, thanks to a new minimally invasive tool that closes wounds using a laser. Based on the laser welding process developed for plastics, the device simplifies the process of suturing and expedites healing.

Although more surgeries are being carried out in a minimally invasive manner, suturing can still be a challenge. Very often, piercing the tissue and tying the knots is difficult because surgeons must operate in very tight quarters. It isn’t like sewing textiles – a knot must be made after every stitch, an exacting process that stresses the patient and can cause a number of complications. If the suture is too tight, there is the danger of a minor hemorrhage. Also, the suture material could cut into the tissue, strangulating the vessels and causing the tissue to die. If the suture is too loose, bleeding at the edges of the wound may occur. The correct suture tension can be difficult to find. Surgeons must subjectively estimate the optimum tension for each scenario because they do not have access to a reproducible standardized setting.

To simplify and expedite surgeries, researchers at Fraunhofer Institute for Production Technology have developed a minimally invasive suturing instrument. Courtesy of Fraunhofer IPT.

Now, researchers at Fraunhofer Institute for Production Technology have developed a semiautomatic process that enables surgeons to connect the suture material with a previously set, predefined tension. The device allows them to join the edges of the wound quickly and safely with a laser, eliminating the difficult task of knotting.

The researchers successfully carried out the suturing process during lab tests. They achieved a suture tension of 0 to 5 N and a lasing time of 0.1 s. Preclinical studies are slated to begin this year at Aachen University Hospital. Initially, the device will be used for minimally invasive surgeries in the abdominal area, but soon could be adapted to keyhole surgeries of the heart, the scientists say.

May 2011
Aachen University HospitalBiophotonicsEuro NewsEuropeFraunhofer Institute for Production TechnologyFraunhofer IPTGermanyindustriallaser suturinglaser welding processminimally invasive surgeryminimally invasive suturingNewssuture tensionlasers

back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2019 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA,

Photonics Media, Laurin Publishing
x Subscribe to EuroPhotonics magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.