Search
Menu
Deposition Sciences Inc. - Difficult Coatings - LB - 8/23

Lasers Tune Quantum Dots

Facebook X LinkedIn Email
GAITHERSBURG, Md., Aug. 20, 2008 – In what could be a key development in cryptography applications, researchers from the National Institute of Standards and Technology (NIST) and the Joint Quantum Institute (JQI), a collaborative center of the University of Maryland and NIST, have found a way to reduce light scattering from quantum dots by manipulating them with lasers.

This new technique improves quantum dots as a source of pairs of “entangled” photons, which are a peculiar consequence of quantum mechanics. Tricky to generate, they remain interconnected even when separated by large distances. Merely observing one instantaneously affects the properties of the other. The entanglement can be used in quantum communication to pass an encryption key that is by its nature completely secure, as any attempt to eavesdrop or intercept the key would be instantly detected. One goal of the NIST-JQI team is to develop quantum dots as a convenient source of entangled photons.Laser-Tuned-Quantum-Dot-1.jpg


Schematic of NIST-JQI experimental set up. Orienting the resonant laser at a right angle to the quantum dot light minimizes scattering. Photo courtesy of Solomon/NIST.

Quantum dots are nanoscale regions of a semiconductor material similar to the material in computer processors, but with special properties due to their tiny dimensions. Though they can be composed of tens of thousands of atoms, quantum dots in many ways behave almost as if they were single atoms.

Unfortunately, almost is not good enough when it comes to the fragile world of quantum cryptography and next-generation information technologies. When energized, a quantum dot emits photons, or particles of light, just as a solitary atom does. But imperfections in the shape of a quantum dot cause what should be overlapping energy levels to separate. This ruins the delicate balance of the ideal state required to emit entangled photons.

Laser-Tuned-Quantum-Dot-2.jpg


Cross-section scanning tunneling microscope image shows indium arsenide quantum dot regions embedded in gallium arsenide. Each 'dot' is approximately 30 nanometers long; faint lines are individual rows of atoms. (Color added for clarity.) Photo courtesy of J.R. Tucker.

To overcome this problem, the NIST-JQI team has discovered that they can use lasers to precisely control the energy levels of quantum dots, just as physicists have been doing with actual single atoms since the mid-1970s and, much more recently, with the artificial quantum dot variety.

With their customized set-up, which includes two lasers, one shining from above the quantum dot and the other illuminating it from the side, the researchers were able to manipulate energy states in a quantum dot and directly measure its emissions. By adjusting the intensity of the laser beams, they were able to correct for imperfection-caused variations and generate more ideal signals. In so doing, the team was the first to demonstrate that laser-tuned quantum dots can efficiently generate photons one at a time, as required for quantum cryptography and other applications.

While the device currently still requires quite cold temperatures and sits in a liquid helium bath, it is compact enough to fit in the palm of your hand—an elegant setup that could be eventually implemented in quantum cryptography applications.

For more information, visit: www.nist.gov


DataRay Inc. - ISO 11146-Compliant

Published: August 2008
Glossary
nano
An SI prefix meaning one billionth (10-9). Nano can also be used to indicate the study of atoms, molecules and other structures and particles on the nanometer scale. Nano-optics (also referred to as nanophotonics), for example, is the study of how light and light-matter interactions behave on the nanometer scale. See nanophotonics.
photonics
The technology of generating and harnessing light and other forms of radiant energy whose quantum unit is the photon. The science includes light emission, transmission, deflection, amplification and detection by optical components and instruments, lasers and other light sources, fiber optics, electro-optical instrumentation, related hardware and electronics, and sophisticated systems. The range of applications of photonics extends from energy generation to detection to communications and...
quantum dots
A quantum dot is a nanoscale semiconductor structure, typically composed of materials like cadmium selenide or indium arsenide, that exhibits unique quantum mechanical properties. These properties arise from the confinement of electrons within the dot, leading to discrete energy levels, or "quantization" of energy, similar to the behavior of individual atoms or molecules. Quantum dots have a size on the order of a few nanometers and can emit or absorb photons (light) with precise wavelengths,...
quantum mechanics
The science of all complex elements of atomic and molecular spectra, and the interaction of radiation and matter.
cryptographyEntangled photonsJoint Quantum InstituteJQIMicroscopynanonanoscaleNational Institute of Standards and TechnologyNews & FeaturesNISTphotonicsphotonsquantum dotsquantum mechanicssemiconductor materialUniversity of MarylandLasers

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.