Close

Search

Search Menu
Photonics Media Photonics Buyers' Guide Photonics EDU Photonics Spectra BioPhotonics EuroPhotonics Industrial Photonics Photonics Showcase Photonics ProdSpec Photonics Handbook
More News
share
Email Facebook Twitter Google+ LinkedIn Comments

Lens-on-MEMS Technology Could Lead to More Compact Optical Devices

Photonics Spectra
May 2018
LEMONT, Ill. — In a collaboration between Argonne National Laboratory and Harvard University, researchers have built a metasurface-based lens on top of a MEMS platform, creating a “lens-on-MEMS” device that focuses light in the MIR spectrum. The MEMS-integrated metasurface lens combines the best features of both technologies while reducing the size of the optical system. It measures 900 m in diameter and is 10 m thick. In this hybrid device, MEMS mirrors reflect scanned light, which the metalens then focuses without the need for an additional optical component, such as a focusing lens.

A 2D scanning MEMS platform controls the angle of the lens along two orthogonal axes by ± 9°, thus enabling dynamic beam steering. The device can be electrically controlled to vary the 2D angular rotation of a flat lens and hence the position of the focal spot by several degrees.

lens on MEMS device, Argonne National Laboratory and Harvard University.
A close-up view of a metasurface-based flat lens (square piece) integrated onto a MEMS scanner. Integration of MEMS devices with metalenses will help manipulate light in sensors by combining the strengths of high-speed dynamic control and precise spatial manipulation of wave fronts. Image taken with an optical microscope at Argonne's Center for Nanoscale Materials. Courtesy of Argonne National Laboratory.

Researchers showed that for low angular displacements, the integrated lens-on-MEMS system does not affect the mechanical performance of the MEMS actuators and preserves the focused beam profile as well as the measured full width at half maximum.

The device could be used to compensate for off-axis incident light and thus correct for aberrations such as coma.

According to researchers, this proof-of-concept integration of metasurface-based flat lenses with 2D MEMS scanners could be extended to the visible and other parts of the electromagnetic spectrum, implying the potential for application across wider fields, such as MEMS-based microscope systems, holographic and projection imaging, lidar scanners and laser printing.

Lens on MEMS technology, Argonne National Laboratory and Harvard University.
A circular metasurface-based flat lens has been integrated onto a MEMS scanner. Integration of MEMS devices with metalenses combine the strength of high-speed dynamic control with precise spatial manipulation of wavefronts. Image taken with a scanning electron micrograph at Argonne's Center for Nanoscale Materials. Courtesy of Argonne National Laboratory.

Dense integration of thousands of individually controlled lens-on-MEMS devices onto a single silicon chip could lead to the creation of a new type of reconfigurable fast digital spatial light modulator that would allow a greater degree of control and manipulation of the optical field.

“This first successful integration of metalenses and MEMS, made possible by their highly compatible technologies, will bring high speed and agility to optical systems, and unprecedented functionalities,” said professor Federico Capasso.

Professor Federico Capasso, Harvard University and Daniel Lopez, Argonne National Laboratory.
Daniel Lopez, group leader of Nanofabrication and Devices at Argonne's Center for Nanoscale Materials (right), Federico Capasso, Harvard's Robert L. Wallace Professor of Applied Physics (left), and four other collaborators have created a smaller, more advanced sensing technology that can be used in a variety of applications, including systems that scan the surroundings of self-driving cars and trucks. Courtesy of Harvard University.

Researchers say the eventual goal would be to fabricate all components of an optical system — the MEMS, the light source and the metasurface-based optics — with the same technology used to manufacture electronics today.

“Then, in principle, optical systems could be made as thin as credit cards,” said Daniel Lopez, group leader of Nanofabrication and Devices at Argonne.

The research was published in APL Photonics (doi:10.1063/1.5018865).

GLOSSARY
lidar
An acronym of light detection and ranging, describing systems that use a light beam in place of conventional microwave beams for atmospheric monitoring, tracking and detection functions. Ladar, an acronym of laser detection and ranging, uses laser light for detection of speed, altitude, direction and range; it is often called laser radar.
Research & TechnologyeducationAmericasArgonne National LaboratoryHarvard John A. Paulson Schoolimaginglight sourcesopticslensesflat lensmetalenslidarMEMSmicoelectronicTech Pulse

Comments
Terms & Conditions Privacy Policy About Us Contact Us
back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2018 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, info@photonics.com

Photonics Media, Laurin Publishing
x Subscribe to Photonics Spectra magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.