Search Menu
Photonics Media Photonics Marketplace Photonics Spectra BioPhotonics EuroPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook

Micromachined Laser Offers Tunability

Facebook Twitter LinkedIn Email Comments
Richard Gaughan

In the hope of adding flexibility to optical communications networks, researchers at Nanyang Technological University have micromachined an external-cavity Fabry-Perot laser diode that is wavelength-tunable.

In the May issue of IEEE Photonics Technology Letters, the researchers describe the design of the 2 x 1.5-mm package, which incorporates a movable micromirror. The mirror was produced by three-layer-polysilicon micromachining processes and was manually lifted to its final vertical configuration onto a movable stage.

A control voltage changes the position of the 300 x 300-µm mirror with respect to the laser diode. With an added drive voltage of ±3 V, the wavelength of the laser diode varies from 1528 to 1544 nm, stepping through different single modes. An optical fiber is bonded to the substrate about 15 µm from the exit face of the diode.

The device could be used in wavelength division multiplexing, making it easy to switch from one channel to another and allowing rapid remote reconfiguration.

Photonics Spectra
Aug 2001
CommunicationsResearch & TechnologyTech Pulselasers

view all
Search more than 4000 manufacturers and suppliers of photonics products and services worldwide:

back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2021 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, [email protected]

Photonics Media, Laurin Publishing
x Subscribe to Photonics Spectra magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.