Close

Search

Search Menu
Photonics Media Photonics Buyers' Guide Photonics Spectra BioPhotonics EuroPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook
More News

2D Circuits On Smooth Surfaces Could Aid Next-Gen Biosensors

Facebook Twitter LinkedIn Email Comments
Atom-flat sensors, made from 2D materials, could be used to monitor performance without adding weight or hindering signal flow if they could be seamlessly integrated onto surfaces with different geometries where detection for near-field signal is desired.

Rice University engineers have developed a method to transfer complete, flexible, two-dimensional circuits from their fabrication platforms to curved and other smooth surfaces. Zehua Jin/Rice University.
Rice University engineers have developed a method to transfer complete, flexible, 2D circuits from their fabrication platforms to curved and other smooth surfaces. Such circuits are able to couple with near-field electromagnetic waves and offer next-generation sensing for optical fibers and other applications. Courtesy of Zehua Jin/Rice University.

2D materials are often touted for their strength, but it’s difficult to move 2D materials without damaging them. Researchers at Rice University have devised a way to keep the materials and their associated circuitry, including electrodes, intact as they’re moved to curved or other smooth surfaces.

To test their concept, the researchers made a 10-nm-thick indium selenide photodetector with gold electrodes and placed it onto an optical fiber. The near-field sensor effectively coupled with an evanescent field (the oscillating electromagnetic wave that rides the surface of the fiber) and accurately detected the flow of information inside the fiber.

Before moving the raw 2D materials to the optical fiber, the researchers covered the materials with a protective layer of polymethyl methacrylate (PMMA, commonly known as plexiglass). A robust bottom layer for the materials was also needed to keep the circuit intact during the move. Both the top and bottom layers needed to be removable.

The ideal solution for the bottom layer, according to the Rice team, was polydimethylglutarimide (PMGI), a sacrificial material used in micromachining. PMGI can be used as a device fabrication platform and easily etched away before transfer to the target. “We’ve spent quite some time to develop this sacrificial layer,” professor Jun Lou said. The researchers found that PMGI also worked with molybdenum diselenide (MoSe2) and other 2D materials.

The device transfer technique developed by the team utilizes the sacrificial polymer underlayer to achieve clean and nondestructive full device transfer. The researchers demonstrated their technique by transferring a complete 2D multilayer InSe photodetector device onto a stripped optical fiber.

Their superthin flexible device assemblies can be integrated onto the fibers themselves to noninvasively monitor the optical fiber performance, the researchers said. The demonstration of optically coupled, conformal 2D devices on substrates of different form factors could enable a variety of near-field optical and sensing applications.

The Rice labs have developed only passive sensors so far, but the researchers believe their technique could make active sensors or devices possible for telecommunication, biosensing, plasmonics, and other applications.

“This paper proposes several interesting possibilities for applying 2D devices in real applications,” Lou said. “For example, optical fibers at the bottom of the ocean are thousands of miles long, and if there’s a problem, it’s hard to know where it occurred. If you have these sensors at different locations, you can sense the damage to the fiber.”

The research was published in ACS Nano (https://pubs.acs.org/doi/10.1021/acsnano.8b07159).

Photonics Handbook
GLOSSARY
optoelectronics
A sub-field of photonics that pertains to an electronic device that responds to optical power, emits or modifies optical radiation, or utilizes optical radiation for its internal operation. Any device that functions as an electrical-to-optical or optical-to-electrical transducer. Electro-optic often is used erroneously as a synonym.
Research & TechnologyeducationAmericasRice Universityfiber opticsoptical fibersmaterialsmaterials processing2D materialsopticsoptoelectronicsSensors & DetectorsCommunicationsnanophotodetectorsnanodevice fabricationBioScan

Comments
back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2019 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, info@photonics.com

Photonics Media, Laurin Publishing
x We deliver – right to your inbox. Subscribe FREE to our newsletters.
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.