Search Menu
Photonics Media Photonics Buyers' Guide Photonics Spectra BioPhotonics EuroPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook
More News

Near-Field Solid-Immersion Mirror Records Data Optically

Facebook Twitter LinkedIn Email Comments
Hank Hogan

Investigators at Seagate Technology’s research laboratory in Pittsburgh have demonstrated a near-field planar solid-immersion mirror that could usher in higher optical data storage densities than what magnetic media offer.

The approach offers several advantages over alternative methods, said research manager William A. Challener. For instance, a planar solid-immersion mirror can enable optical recording and reading below the diffraction limit of standard far-field optics while still allowing high throughput. This is not possible with aperture-based near-field techniques. And because it is a mirror, not a lens, it is free of chromatic aberration.

Manufacturing a planar solid-immersion mirror does not require tedious or complex polishing. Instead, its shape is easily and accurately defined by e-beam lithography. Moreover, Challener said, hundreds of thousands of the devices can be made simultaneously on a wafer employing standard fabrication techniques.

In a demonstration of the approach, the researchers fabricated a two-dimensional parabolic mirror in an optical planar waveguide. They built the mirror by thin-film deposition of a Ta2O5 high-refractive-index core on a lower-index cladding of SiO2. The top cladding of the waveguide was air. They deposited this film on an Al2O3/TiC substrate. Using an electron beam and subsequent processing, they carved out a planar solid-immersion mirror 100 µm long, with an opening of 50 µm at one end and of 6 µm at the other.

They mounted the mirror on a slider and coupled an 830- or 488-nm laser beam into it with an optical fiber. The waveguide confined the laser radiation, and the parabolic mirror focused it to a spot size of about λ/4. They used the optical recording setup to make marks in phase-change material such as that found in CDs and DVDs.

Challener said that the next step in the work involves building a planar solid-immersion mirror in a recording device and demonstrating recording densities higher than those currently achieved with magnetic methods.

Photonics Spectra
Dec 2005
industrialmagneticmirrorsoptical data storage densitiesResearch & TechnologySeagate TechnologyTech Pulse

back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2020 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA,

Photonics Media, Laurin Publishing
x Subscribe to Photonics Spectra magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.