Search Menu
Photonics Media Photonics Marketplace Photonics Spectra BioPhotonics EuroPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook

New Bilayer Material Could Improve LED Technology

Facebook Twitter LinkedIn Email Comments
A new bilayer material measuring less than one nanometer in thickness per layer could lead to more efficient and versatile light emission.

Using laser beams and the 'Scotch tape' method used to create graphene, researchers craft new materail that could improve LED screens.
Using the 'Scotch tape' method made famous by creating graphene and laser beams, researchers craft new material that could improve LED screens. Courtesy of KU.

Researchers working at the Ultrafast Laser Lab at the University of Kansas (KU) successfully created the material by combining atomically thin layers of molybdenum disulfide and rhenium disulfide.

Hui Zhao, associate professor of physics and astronomy at KU, said molybdenum disulfide and rhenium disulfide both absorb light as semiconductors, are flexible and can be stretched and compressed.

“The goal of this whole direction of research is to produce light-emitting devices, such as LEDs, that are ultrathin — just a few nanometers thick — and flexible enough that you can bend it. We showed through this bilayer material [that] can be achieved,” said Zhao.

The KU researcher compared the behavior of the electrons in the new material to that of a classroom.

“One can think of a material as a classroom full of students — which are the electrons — one on each seat,” he said. “Sitting on a seat, a student — or electron — can’t move freely to conduct electricity. Light can provide enough energy to stand up some of the students, who can now move freely and, as electrons, to conduct electricity. This process is the foundation for photovoltaic devices, where the energy of sunlight is captured and converted to electricity.”

Zhao said that emission of light involves the inverse process, in which a standing electron sits down in a seat, releasing its kinetic energy in the form of light.

“To make a good material for light emission devices, one needs not only the electrons that carry energy, but also the ‘seats’ — called holes — for the electrons to sit down,” he said.

In Zhao’s new material all the electrons and their seats will be in one layer, enabling light emission to be much stronger.

Zhao and fellow researchers Matthew Bellus, Samuel Lane, Frank Ceballos and Qiannan Cui, all KU physics graduate students, and Ming Li and Xiao Cheng Zeng, of the University of Nebraska-Lincoln, created the new material using the same low-tech “Scotch tape” method pioneered in creating graphene.

“There’s a trick,” Zhao said. “You use Scotch tape to peel off a layer from the crystal and then you fold the tape a few times, so when you push the tape against a substrate and quickly peel it off, some of the material will be left on the substrate. Under a microscope, single-atom layer sections will have a different color because of their thickness, very much like a thin film of oil on water.”

The researchers at KU’s Ultrafast Laser Lab were then able to stack the MoS2 layer on top of ReS2, with a precision better than one micrometer. The atomically thin sheets were connected by the so-called van der Waals force, the same force which allows a gecko to scale a smooth window pane.

“The van der Waals force isn’t very sensitive to the atomic arrangement,” said Zhao. “So, one can use these atomic sheets to form multilayer materials, in a fashion like atomic Legos.”

After the samples were made, team members used ultrafast lasers to observe motion of electrons and seats between the two atomic layers, and they saw clear evidence that both electrons and the seats can move from MoS2 to ReS2, but not along the opposite direction.

In doing so, the team confirmed theoretical calculations performed by Li and Zeng, who previously had analyzed related properties of about a dozen atomic sheets, and predicted that bilayers formed by MoS2 and ReS2 would have promise as the basis for LED technology.

According to Zhao, the ultimate goal is to develop a method that allows precise control of the location of electrons and seats among different atomic layers so that the electronic and optical properties of the material can be controlled and optimized.

“We’d someday like to see LEDs that are thinner, more energy efficient and bendable,” he said. “Think about a computer or phone screen if you could fold it a few times or and put it in your pocket.”

The research has been published in the peer-reviewed journal Nanoscale Horizons (doi: 10.1039/C6NH00144K).

Photonics Spectra
Apr 2017
The scientific observation of celestial radiation that has reached the vicinity of Earth, and the interpretation of these observations to determine the characteristics of the extraterrestrial bodies and phenomena that have emitted the radiation.
astronomyUltrafast Laser Labultrafast lasersLEDsUniversity of KansasKUlasersResearch & TechnologyHui ZhaoeducationScotch tapelight sourcesopticsmaterialsTest & MeasurementphotovoltaicsMatthew BellusSamuel LaneFrank CeballosQiannan CuiMing LiXiao Cheng ZengTech Pulse

view all
Search more than 4000 manufacturers and suppliers of photonics products and services worldwide:

back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2022 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, [email protected]

Photonics Media, Laurin Publishing
x Subscribe to Photonics Spectra magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.