Search
Menu
PI Physik Instrumente - Revolution In Photonics Align LW LB 3/24

New Method Detects Silicon Thin-Film Defects

Facebook X LinkedIn Email
GAITHERSBURG, Md., July 18, 2006 -- High-performance strained-silicon semiconductor devices have advantages over other types of semiconductors, and also a big problem: the manufacturing process can cause hard-to-find crystal defects that can bunch together and degrade the wafer's performance. But a sensitive new x-ray imaging technique can help manufacturers avoid leaving clusters of defects known as "pile-ups" in finished semiconductors.

Strained silicon (Si) is a new, rapidly developing material for building enhanced-performance silicon-based transistors. Introducing a slight tensile strain in the lattice of the silicon crystal dramatically improves the mobility of charges in the crystal, enabling faster, higher-performance devices. The strain is achieved by first growing a relatively thick crystalline layer of silicon-germanium (SiGe) on the normal silicon substrate wafer, and then growing a thin film of pure silicon on top. The difference in lattice spacing between pure silicon and SiGe creates the desired strain, but also creates occasional performance-slowing defects in the crystal. The problem is particularly bad when the defects cluster together in “pile-ups.”
NISTthin-film.jpg

X-ray topographs of three different strata of a strained-silicon wafer show close correspondence in defects from the base silicon layer (top) through the final strained-silicon layer (bottom). Color has been added for contrast, one particular defect area is highlighted. (Image: NIST)

Deposition Sciences Inc. - Difficult Coatings - MR-8/23

One of the best methods for studying crystal defects is to observe the image of x-rays diffracted from the crystal planes, a technique called x-ray topography. Until now, however, it’s been impossible to study the interaction of defects in the multiple layers of these complex Si–SiGe–Si wafers.

In a recent paper in Applied Physics Letters, researchers from the National Institute of Standards and Technology (NIST) and AmberWave Systems Corp. of Salem, N.H., detail a high-resolution form of x-ray topography that can distinguish individual crystal defects layer by layer. The technique combines an extremely low-angle incident x-ray beam (“glancing incidence”) to increase the signal from one layer over another and the use of highly monochromatic x-rays tuned to separate the contributions from each layer based on their different lattice spacings.

Their results show that crystal defects initially created at the interface between the silicon wafer and the SiGe layer become “templates” that propagate through that layer and create matching defects in the strained-silicon top layer. These defects, in turn, are notably persistent, remaining in the strained-silicon even through later processing that includes stripping the layer off, bonding it to an oxidized silicon wafer, and annealing it to create strained-silicon-on-insulator (SSOI) substrates.

The research was performed at Argonne National Laboratory’s Advanced Photon Source, and supported in part by the Department of Energy. For more information, visit: www.nist.gov

Published: July 2006
Glossary
advanced photon source
An accelerator at the Argonne National Laboratory, providing powerful x-ray beams for materials research applications.
si
Systeme Internationale d'Unites, the international metric system of units.
x-ray diffraction
The bending of x-rays by the regular layers of molecules in a crystal acting like a very small diffraction grating. The diffraction pattern so obtained and recorded on film provides a means for analyzing the crystal structure.
Advanced Photon SourceArgonnedefectsImagingindustrialNews & FeaturesNISTsemiconductorsSiSi-SiGe-SiSiGestrained-siliconthin-filmtopographyx-rayx-ray diffraction

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.