Search
Menu
PI Physik Instrumente - Revolution In Photonics Align LW LB 3/24

New Methods Grow Nanotubes on Metal

Facebook X LinkedIn Email
Two new techniques that allow scientists to grow carbon nanotubes directly on metal surfaces of nearly any shape and size could help overcome some of the hurdles to using the supersmall cylinders in computer chips, displays, sensors and many other electronic devices.

Many of the potential applications of carbon nanotubes require the ability to attach them to electrically conductive surfaces, but until now researchers have only been successful in creating high-resistance interfaces between nanotubes and substrates. Now a team from Rensselaer Polytechnic Institute in Troy reports two new techniques, each following a different approach, for placing carbon nanotube patterns on metal surfaces.RPInanowire.jpg

The results appear in separate papers in the November issue of Nature Nanotechnology and the Oct. 16 issue of Applied Physics Letters (APL).
Carbon nanotubes attached to a thin metal wire. (Image: Rensselaer/Swastik Kar)
“Carbon nanotubes offer promising applications in fields ranging from electronics to biotechnology,” said Saikat Talapatra, a postdoctoral research associate with the Rensselaer Nanotechnology Center and lead author of the Nature Nanotechnology paper. But since many of these applications are based on the superior conductivity of carbon nanotubes, good contact between nanotubes and conducting metal components is essential.

Both of the newly developed techniques could bring the use of nanotubes as interconnects on computer chips closer to reality -- a long-sought goal in the nanotechnology community. As chip makers seek to continually increase computing power, they are looking to shrink the dimensions of chip components to the nanometer scale, or about 1-100 billionths of a meter. Communication between components becomes increasingly difficult at this incredibly small scale, making carbon nanotubes a natural choice to replace metal wires, the researchers said. 

In the first technique -- dubbed floating catalyst chemical vapor deposition -- they heat a carbon-rich compound at extremely high temperatures until the material vaporizes. As the system cools, carbon deposits directly on the metal surface in the form of nanotube arrays. For this experiment, the team used surfaces made from Inconel, a nickel-based “superalloy” with good electrical conductivity. Until now this technique has only been used to grow nanotubes on substrates that are poor conductors of electricity.

There are many potential advantages to growing carbon nanotubes directly on metals with this simple, single-step process, Talapatra said. Nanotubes attach to the surface with much greater strength, excellent electrical contact is established between the two materials and nanotubes can be grown on surfaces of almost any shape and size, from curved sheets to long metal rods.

Meadowlark Optics - Building system MR 7/23

But chemical vapor deposition is a high-temperature process, which makes it incompatible with some sensitive electronic applications. “We have developed an alternate process of obtaining carbon nanotube arrays on any conducting substrate by contact printing methods,” said Ashavani Kumar, a postdoctoral research associate in materials science and engineering at Rensselaer and lead author of the APL paper.

In collaboration with Rajashree Baskaran, a staff research engineer in the Components Research Div. at Intel Corp., the team developed a procedure that mimics the way photographs are printed from a film negative. They first grow patterns of carbon nanotubes on silicon surfaces using chemical vapor deposition, and then the nanotubes are transferred to metal surfaces that are coated with solder -- a metal alloy that is melted to join metallic surfaces together. The nanotubes stick in the solder, maintaining their original arrangement on the new surface.

And since solder has a low melting point, the process takes place at low temperature. “The contact printing process we have developed provides a potentially versatile method of incorporating carbon nanotubes in applications which cannot tolerate the typical high temperature of growth,” Baskaran said.

In addition to showing promise for interconnects in computer chips, carbon nanotubes also exhibit a physical property called “field emission.” When a voltage is applied, electrons are pulled out from the surface, which means that nanotubes could be combined with metals to produce high-resolution electronic displays, chemical sensors and flash memory devices for computers.

The researchers also demonstrated that the chemical vapor deposition procedure can be used to make nanotube electrodes for supercapacitors -- devices that have unusually high energy densities when compared to common capacitors, which are used to store energy in electrical circuits. These are of particular interest in automotive applications for hybrid vehicles and as supplementary storage for battery electric vehicles, according to the researchers.

The research published in Nature Nanotechnology was funded by the National Science Foundation and the Interconnect Focus Center. The APL work was funded by Intel via a gift grant.

Both projects were performed under the guidance of Pulickel Ajayan, the Henry Burlage Professor of Materials Science and Engineering at Rensselaer and an expert in fabricating nanotube-based materials. Other Rensselaer researchers involved with the project are: Robert Vajtai, Swastik Kar, Omkaram Nalamasu, Victor Pushparaj, Sunil Pal, Lijie Ci, Mancheri Shaijumon and Sumanjeet Kaur.

For more information, visit: www.rpi.edu

Published: November 2006
Glossary
chemical vapor deposition
Chemical vapor deposition is a process of applying dopants to a glass bait by flame reactions of gaseous compounds. See also outside vapor-phase oxidation; inside vapor-phase oxidation.
nano
An SI prefix meaning one billionth (10-9). Nano can also be used to indicate the study of atoms, molecules and other structures and particles on the nanometer scale. Nano-optics (also referred to as nanophotonics), for example, is the study of how light and light-matter interactions behave on the nanometer scale. See nanophotonics.
nanotube
A nanotube, also known as a nanotubule or simply a tube-like structure, is a nanoscale cylindrical structure composed of various materials, including carbon, boron nitride, or other compounds. Nanotubes have unique physical and chemical properties due to their small size and specific atomic arrangement, making them of significant interest in various scientific and technological fields. One of the most well-known types of nanotubes is the carbon nanotube (CNT), which is composed of carbon...
photonics
The technology of generating and harnessing light and other forms of radiant energy whose quantum unit is the photon. The science includes light emission, transmission, deflection, amplification and detection by optical components and instruments, lasers and other light sources, fiber optics, electro-optical instrumentation, related hardware and electronics, and sophisticated systems. The range of applications of photonics extends from energy generation to detection to communications and...
APLBaskarancarbon nanotubechemical vapor depositionConsumerelectronic deviceshybridIntelKumarmetalnanonanotubeNews & FeaturesphotonicsRPISensors & Detectorssoldersupercapacitor

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.