Search Menu
Photonics Media Photonics Marketplace Photonics Spectra BioPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook

Optical devices uncover how flies walk upside down

Facebook Twitter LinkedIn Email
Kevin Robinson

In a series of experiments aimed at learning more about how flies can walk upside down, researchers at Max Planck Institute have determined that flies place their feet very carefully to keep them stuck to the ceiling. The work is part of an overall effort to better understand the mechanism involved, and it could be useful in applying it to high-tech robots.

Since the 19th century, scientists have been studying how insects adhere to a ceiling. Various insects have different systems for staying put. Typically, they either have pads on their feet covered by tiny hairs that increase the contact area with the substrate or they have very soft, adaptable pads. In addition, many insects, such as houseflies, secrete fluid onto the pads of their feet to enhance capillary forces in the contact.

Stanislav N. Gorb of the Evolutionary Biomaterials Group at Max Planck Institute for Metals Research in Stuttgart, Germany, has used a variety of optical instruments to study how flies walk. Three years ago, using high-speed video, the group monitored the flies’ movements.

Researchers at Max Planck Institute for Metals Research used fiber optics to measure the forces exerted when a fly walks upside down. They observed that feet of a common bluebottle fly has thousands of tiny hairs that help it walk on inverted surfaces. Courtesy of Stanislav N. Gorb.

The video showed that flies move alternate, opposite legs on each side when walking upright. This keeps three legs in place while three move. Upside down, they move only two legs at a time so that more feet remain in place to counteract gravity. The high-speed camera, from Photron Inc. of San Diego, was especially useful in watching the flies lift their feet. Because the attachment between the footpads and the surface is so strong, the insects have to use four motions to free their feet: shifting, twisting, rotating and pulling.

Recently, Gorb and his colleagues designed an experiment using a glass spring equipped with fiber optic sensors from Tetra GmbH of Ilmenau, Germany, to measure the contact forces as flies walked across the substrate. They presented the work at the annual meeting of the Society for Experimental Biology in Canterbury, UK.

The fiber optic sensors measured deflections in two directions. “As soon as the fly touched the glass platform attached to the spring, we measured the spring deflections, which were recalculated into forces,” Gorb said.

The scientists found that flies do not press, or only very gently press, on the ceiling; they simply slide their footpads along it. They also discovered that the angle at which a fly’s foot touches the surface helps control the attachment forces. Gorb said that changing the angle from roughly 30° to 90° can mean an eightfold variance in attachment strength.

The researchers are developing materials that can mimic the adhesive forces of fly feet, in hopes of creating robots or devices that could assist climbers. From here, Gorb said, they plan to replicate the experiments with other insects.

Jul 2006
BiophotonicsBusinessRapidScanSensors & Detectors

back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2023 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, [email protected]

Photonics Media, Laurin Publishing
x Subscribe to BioPhotonics magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.