Search Menu
Photonics Media Photonics Marketplace Photonics Spectra BioPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook

Optical microphone listens with light

Facebook Twitter LinkedIn Email
Ashley N. Rice, [email protected]

A nearly 1-mm-thick optical sensor that measures minute movements and extremely quiet sounds could improve the sensitivity of microphones and give them a sense of direction.

The technology could enable microphones to “see where the sound comes from, pick up the voice of the person speaking, and filter out other sources of noise in the room,” said Matthieu Lacolle, an information and communication technology researcher at SINTEF.

SINTEF has developed a technology that combines two optical phenomena – interference and diffraction – to make microphones hypersensitive. Photo courtesy of SINTEF.

Its hypersensitivity is based on a combination of two optical phenomena – interference and diffraction. Exploiting these phenomena enabled the researchers to measure movement of less than the diameter of an atom using the sensor.

Special grooved microstructures were created on the reference surface directly beneath the microscope membrane, which picks up pressure waves produced by sound.

“The structures are reflecting metal lines deposited on a transparent substrate and forming a focusing diffractive pattern (basically a diffractive Fresnel lens),” Lacolle told Photonics Spectra.

When illuminated with a vertical-cavity surface-emitting laser, these microstructures can read the direction of reflected light using photodetectors, which transform the light into electrical signals, he said.

“There exist today high-end microphones with such sensitivity, but they are usually bulky and expensive,” Lacolle said. “In essence, everyone who needs a better microphone than a condenser MEMS microphone would benefit from an optical microphone.”

A batch of the devices is currently under fabrication, “and the next step will hopefully be industrialization together with our partners,” he said.

The microphone has garnered a lot of interest for many different industrial applications, Lacolle said. Norwegian noise-measurement equipment supplier Norsonic intends to use the instrument to measure both sound pressure and acoustic power.

Additional applications for the sensor include accelerometers, gyroscopes, vibration and pressure sensors, geophones for seismic shooting, photoacoustic gas sensors, and sensors for highly irradiated sites or areas with electromagnetic radiation.

Photonics Spectra
Sep 2013
1. The additive process whereby the amplitudes of two or more overlapping waves are systematically attenuated and reinforced. 2. The process whereby a given wave is split into two or more waves by, for example, reflection and refraction of beamsplitters, and then possibly brought back together to form a single wave.
EuropeFiltersimagingindustrialinterferencelensesMatthieu Lacollemicrophonemicrophone sensitivityMicroscopyMiNaLabNorsonicNorwayOle Herman Bjoroptical diffractionopticsResearch & TechnologySensors & DetectorsSINTEFTech Pulselasers

back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2023 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, [email protected]

Photonics Media, Laurin Publishing
x Subscribe to Photonics Spectra magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.