Search Menu
Photonics Media Photonics Marketplace Photonics Spectra BioPhotonics EuroPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook

Painting Nanowires Yields High-Speed Circuits

Facebook Twitter LinkedIn Email Comments
Anne L. Fischer

The production of circuits and processors from silicon substrates is expensive, and the required high-temperature fabrication process is not always compatible with a variety of materials. Researchers at Harvard University in Cambridge, Mass., have found an alternative: using nanowires to create electronic devices on glass and plastic from a solution. The technique eliminates the need for high temperatures in the production process.

High-frequency nanowire ring oscillators can use glass, plastic or other materials as a substrate. In this optical image of a nanowire ring oscillator on glass (shown with the corresponding circuit diagram), the patterned nanowire film appears white (top). In tests, the device exhibited 11.7-MHz oscillation (bottom), 20 times faster than that of those made using alternative low-temperature fabrication techniques. ©Nature Publishing Group.

Lead researcher Charles M. Lieber explained that the group set out to show that these high-performance nanowire-laced solutions can literally be painted onto any material to make fast circuits and processors that rival those made in billion-dollar fabrication lines today. Using single-crystal silicon nanowires as the semiconductor, the team went beyond the limits of traditional silicon semiconductor processing because the nanowires could be manipulated using a liquid solution and then spread onto any substrate.

To test the method, the scientists used nanowire thin-film transistors to generate fully integrated inverters and ring oscillators on glass substrates. The ring oscillators comprised three inverters in series, with a feedback loop completing the ring. The integration was entirely on the chip, with no external wiring.

They found that the output voltage of the ring oscillators was stable and self-sustained. The devices performed 20 times faster — up to 11.7 MHz — than those made at low temperatures using organic semiconductors, which, at best, operate in the 100-kHz regime.

One challenge to the design is that supply voltages of 35 V or more are required to achieve stable oscillations. Lieber said that, through device design and choice of materials, more complex devices may be built with lower voltage requirements. Recently, for example, the scientists operated ring oscillators at 15 V with a similar design but with improved nanowires. Using improved dielectrics, Lieber expects to decrease this to below 10 V.

The next step is to further optimize the structures to enable higher device frequencies, possibly leading to microwave-frequency oscillators on flexible plastics. These could be used in applications that must be shock-resistant, lightweight, flexible and/or curved. Their low cost may make them appropriate for mobile applications or for inexpensive, throwaway electronics such as a disposable computer or a flexible color display that can be sewn into clothes or packaged goods.

Lieber also indicated that the potential exists for sophisticated photonics, such as nanowire-based LEDs, on plastics or other substrates.

Nature, April 28, 2005, p. 1085.

Photonics Spectra
Jul 2005
electronic devicesFeaturesmaterialsnanoplasticSilicon substrates

view all
back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2021 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, [email protected]

Photonics Media, Laurin Publishing
x Subscribe to Photonics Spectra magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.