Search Menu
Photonics Media Photonics Buyers' Guide Photonics EDU Photonics Spectra BioPhotonics EuroPhotonics Industrial Photonics Photonics Showcase Photonics ProdSpec Photonics Handbook
More News
Email Facebook Twitter Google+ LinkedIn Comments

Princeton Lightwave Gets More Funding for Solid-State Lasers
Aug 2005
CRANBURY, N.J., Aug. 25 -- Princeton Lightwave Inc. (PLI), a producer of near infrared, high-power diode lasers and application specific detectors for optical communications, defense and sensing applications, announced that the US Department of Defense’s High Energy Laser Joint Technology Office (JTO) has awarded second-year funding to PLI to continue the development of highly scalable eye-safe solid-state lasers using InP diode pumping with ultra-low photon defect. The original two-year contract, awarded in July 2004, was in excess of $1 million.

Central to this announcement from the Department of Defense is the development of stacks of InP diode-pump laser arrays with very high output powers. These laser stacks will be optimized for pumping an Er:YAG gain medium at wavelengths very close to the solid-state laser emission wavelength. PLI says that such a design using resonance pumping will greatly reduce undesirable heating of the gain medium and allow for the scaling of the laser system to multi-kilowatt outputs while maintaining high beam quality. The second year of program support will enable PLI and its research partners at the Army Research Laboratory in Adelphi, Md., to demonstrate a 1-kW, eye-safe, Er:YAG solid-state laser.

“The transition to InP-based long wavelength pump lasers is a natural progression for the next generation of eye-safe solid-state and fiber lasers,” stated Dimitri Garbuzov, PLI’s chief scientist. “In addition to alleviating active media overheating, the use of InP-based pump sources avoids a critical problem inherent to GaAs diode lasers associated with the degradation of the diode laser mirror facets. The photon flux for InP pump lasers can be several times larger than that of traditional GaAs-based pumps at comparable device lifetimes.”

“PLI’s achievements during the first year of this JTO-sponsored program included the first demonstration of 100 W from a diode-pumped Er:YAG solid-state laser emitting near 1.65 µm and dramatically increased output power at 1530 nm from InP pump laser bars,” says PLI Chief Technical Officer Mark Itzler. “We look forward to surpassing 1 kW power levels with this solid-state laser technology.“

For more information, visit:

The technology of generating and harnessing light and other forms of radiant energy whose quantum unit is the photon. The science includes light emission, transmission, deflection, amplification and detection by optical components and instruments, lasers and other light sources, fiber optics, electro-optical instrumentation, related hardware and electronics, and sophisticated systems. The range of applications of photonics extends from energy generation to detection to communications and...
Communicationsdefensediode lasersdiode pumpingfiber lasersInPJTONews & FeaturesphotonicsPLIPrinceton LightwaveSensors & Detectorssolid-statelasers

Terms & Conditions Privacy Policy About Us Contact Us
back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2019 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA,

Photonics Media, Laurin Publishing
x We deliver – right to your inbox. Subscribe FREE to our newsletters.
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.