Close

Search

Search Menu
Photonics Media Photonics Marketplace Photonics Spectra BioPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook

Quantum yield of individual nanotubes determined

Facebook Twitter LinkedIn Email
Single-walled carbon nanotubes have interesting optical properties, including fluorescence in the near-infrared range. Unfortunately, they tend to clump together during production, quenching their fluorescence to less-than-useful levels. In fact, the quantum yield of heterogeneous mixtures of isolated nanotubes is less than 0.05 percent.

To find out whether the same poor performance is true of all individual nanotubes, investigators at DuPont Central Research and Development in Wilmington, Del., and at the University of Rochester and at Cornell University in Ithaca, both in New York, studied the particles using single-molecule spectroscopy.

Their setup included an inverted microscope, a laser emitting at 632.8 nm and a 100× oil-immersion objective with an NA of 1.3 to deliver the beam and to collect fluorescence. Before exciting individual nanotubes and collecting the subsequent emissions, the scientists performed the same steps with CdTe/ZnS quantum dots. The data from these particles provided a benchmark for comparison with the nanotubes’ fluorescence.


They also imaged the quantum dots using a scanning transmission electron microscope and an electron energy loss spectroscopy system, which enabled them to measure accurately the absorption cross sections of the quantum dots. The absorption cross section of the nanotubes was extracted from absorbance measurements. In turn, this information allowed them to determine the excitation rates of both types of particles.

By combining the cross sections and the fluorescence intensities from individual nanotubes and quantum dots, the investigators found that the average quantum yield of the brightest nanotubes in the sample was approximately 3 ±1 percent — about two orders of magnitude higher than the quantum yield of nanotube ensembles. They believe that the yield could be even higher if manufacturing flaws in the nanotubes could be avoided, thus enabling the use of the particles in biological imaging and biosensing applications.

They report their work in the Nov. 13 ASAP edition of Nano Letters.

BioPhotonics
Dec 2007
GLOSSARY
fluorescence
The emission of light or other electromagnetic radiation of longer wavelengths by a substance as a result of the absorption of some other radiation of shorter wavelengths, provided the emission continues only as long as the stimulus producing it is maintained. In other words, fluorescence is the luminescence that persists for less than about 10-8 s after excitation.
single-walled carbon nanotubes
Referred to as SWCNTs, these cylindrical nanostructures composed of a folded sheet of graphene can be used as near-infrared markers for small animal multiplex imaging. Emitting at different wavelengths, which can be tuned in the visible or NIR region, SWNCTs provide photostable, narrow bandwidth fluorescence in a wide chromatic variety. That enables simultaneous imaging of a large number of spectrally separated markers, through the use of global hyperspectral imaging. In addition to being used...
As We Go To PressBiophotonicsBreaking NewsfluorescenceindustrialMicroscopyoptical propertiesPresstime Bulletinsingle-walled carbon nanotubes

back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2023 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, [email protected]

Photonics Media, Laurin Publishing
x Subscribe to BioPhotonics magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.