Everlight Electronics Granted LED Royalty License

Technologies like integrated signal distributing, processing, and sensing networks require basic optical elements such as waveguides, splitters, gratings, and optical switches to be miniaturized....

Organic-based optoelectronics have the potential to provide an energy-efficient way to operate low-power indoor devices and wireless IoT sensors. Organic photovoltaic cells (OPVs) and organic...

The Fraunhofer Institute for Photonic Microsystems (IPMS) aims to support more secure, faster data processing by integrating machine learning algorithms into digital devices. Although...

Self-driving vehicles need enough sensors to guide them safely through all types of traffic situations — and the sensors need enough space to work properly. As more sensors are added to...

The dual-lens TSMP95000 and single-lens TSMP96000 and TSMP98000 from Vishay Intertechnology are miniaturized infrared (IR) sensor modules for remote control systems that combine a wide supply voltage...

The GP-CVM600P series of 600-W LED constant voltage drivers from GlacialPower include nondimming, 3-in-1, and DALI-2 dimming versions. The direct-current output voltages include 12, 24, 36, 48,...

The series of colored LEDs from ams OSRAM are RGB versions of the previously released OSTAR® Projection Compact LEDs. Using a 2-mm² chip, the LEDs have a high luminous output, with the...

The LUX 3030 and 2835 from Luminus Devices are LEDs with KSF narrow-band red phosphor technology. The LEDs deliver a 120° typical viewing angle and minimum 90 color rendering index (CRI) with a...

To Isaac Newton the problem was clear, and in 1704 he realized the effects of atmospheric turbulence on image formation. Just as heat waves shimmering above a hot patch of ground can distort our...

In the beginning, automated inspection focused on the camera and optics, the algorithms, the interface hardware and the processor. Only rarely was attention paid to the lighting system or lighting...

Any number of medical, industrial, and analytical applications requires the detection of light. Chemiluminescence, bioluminescence, fluorescence, and atomic absorption are just a few, and all require...

Illumination design has developed rapidly to include not only automotive headlamps and street lamps, but also backlit displays, fluorescent panel lighting, light-emitting diode or laser sources, and...

MKS' Newport OptoFlash delivers up toe 10 discrete channels where pre-determined wavelength detection is essential to acquiring fast sample measurements.

Advanced Image Intensifier adapter for low light level imaging applications, the Cricket™² is a plug & play camera attachment enabling low light level imaging and extreme high shutter speeds for CMOS...

Everything you need to know about soldering, mounting, thermal management, drive current, environment, and more, regarding extending the lifetime of your laser diodes.

Answering some common questions new users of optical design and analysis software have are “How accurate are the results?” or “Can I trust the results I get?” and discussing the importance of...

Lasers, LEDs, and photonics in general are providing new dimensions to industrial automation solutions, far beyond illumination and material treatment. They enable open work-cell production setups as...

The world we live in is changing rapidly and technologies are emerging to adapt to this dynamic landscape. One such emerging and quickly evolving technology is Vertical Cavity Surface Emitting Laser...

Fluorescence imaging in life sciences and microscopy applications has traditionally used mercury, metal halide, and xenon arc lamps for illumination. With advances in technology, LEDs are now able to...

Vince Forte of Marktech Optoelectronics reviews InGaAs detector types, packaging, performance characteristics, and applications in the NIR and SWIR wavelength bands. He focuses particularly on photo...

In semiconductor physics and materials science, the term "III-V materials" refers to compounds composed of elements from group III and group V of the periodic table. More specifically, these...

Silicon carbide (SiC) light-emitting diodes (LEDs) are semiconductor devices that emit light when an electric current is applied to them. These LEDs are made using silicon carbide as the...

Gallium nitride (GaN) is a compound made up of gallium (Ga) and nitrogen (N). It is a wide-bandgap semiconductor material that exhibits unique electrical and optical properties. Gallium nitride is...

A blue diode laser is a type of semiconductor laser that emits light in the blue wavelength range of the electromagnetic spectrum, typically between 400 and 500 nanometers. Diode lasers are compact,...

On this month's episode of Light Matters, we take you to the South by Southwest (SXSW) Trade Show in Austin, Texas, as new photonics innovations hit the show floor of the Austin Convention Center....

In this month's Light Matters Extra, we take you to the Quantum Photonics Laboratory at MIT run by Dr. Dirk Englund. Dr. Englund's group, the Quantum Photonics Group, is made up of postdocs and...

On this month's episode of Light Matters, we take you on a brief tour of the Higgins Laboratories at Worcester Polytechnic Institute (WPI). Quinsigamond Community College and WPI received a $4M grant...

Tune into this month's edition of Light Matters for some of the highlights from Optifab 2017, as distributors and buyers from all over the world met in the photonics industry hub of Rochester, New...

A fiber optic sensor is a device that uses optical fibers to detect and measure physical, chemical, biological, or environmental parameters. Unlike traditional electrical sensors, fiber optic sensors...

A photodiode is a two-electrode, radiation-sensitive junction formed in a semiconductor material in which the reverse current varies with illumination. Photodiodes are used for the detection of...

The LaCroix name is synonymous with quality precision optics. Since 1947, three generations of family leadership have guided LaCroix Precision Optics to become the premier precision optics...

Established in 1985, OZ Optics is a leading worldwide supplier of fiber optic components, test equipment and sensors. OZ Optics manufactures its products in three locations, Ottawa (Canada),...

Baumer Group is a manufacturer of sensors, encoders, measuring instruments, and components for automated image processing. Baumer combines innovative technologies and customer-oriented service into...

Andor Technology Ltd is a global developer and manufacturer of high-performance scientific cameras, microscopy systems and spectrographs for academic, government, and industrial applications. Founded...