Fujitsu Opens Business Support Center in Europe

Dental laser supplier BIOLASE appointed Jennifer Bright CFO and Steven Sandor COO. Bright served as the company’s vice president of finance beginning in April 2021. Sandor joined the company in...

Representatives from the New York Center for Research, Economic Advancement, Technology, Engineering, and Science (NY CREATES) visited the Fraunhofer Institute in Dresden, Germany to set concrete...

Stephen Streiffer was named director of Oak Ridge National Laboratory (ORNL). Streiffer serves as interim director at SLAC National Accelerator Laboratory and will join ORNL in October. Streiffer...

MicroCare, a manufacturer of chemicals and tools for critical cleaning, hired Marufur Rahim as technical director to oversee the company’s laboratory, research and development, and quality...

Integrated Z-block Subassemblies for 400 G Transceivers from HYC Co. Ltd. integrates all optical components at the RX end of high-speed transceivers including receptacle, collimator, Z-block, lens...

The EVG®850 NanoCleave™ from EV Group is a system that enables nanometer-precision release of bonded, deposited, or grown layers from silicon carrier substrates. The system does this by...

The MassFluidix® High Concentration microfluidic system from Refeyn extends mass photometry to high-concentration samples. The system enables accurate measurement of low-affinity biomolecular...

The ContourX-1000 from Bruker Corp. is a white-light interferometry system that enables fast, automated areal measurements of surface texture and roughness. It features patented tip/tilt head,...

ACOUSTO-OPTIC SCANNING DEVICES: CHARACTERISTICS MODULATORS Material Bandwidth (MHz) Rise Time (ns) Acousto Input Power (W) (Saturation) Material Wavelength Range...

Optics can be contaminated in many ways. Contamination can be kept to a minimum by returning the optics to their case after use or by covering the optics for protection from the outside environment....

To the novice or casual user of optics, the acquisition of an optical system can be a very difficult experience. Failure to understand the ground rules can result in unnecessarily high cost, late...

The first high-reflectance mirror coatings for the UV and vacuum UV (VUV) were of the Al + MgF2 type produced in the late 1950s. Coatings of this design are still used today for multigas cavity...

This whitepaper looks at the unique challenges associated with optical systems by exploring two extremes, an ultra-high precision instrument, and a low-cost consumer product, and the different...

Space can be a harsh environment for optical coatings. Optimax has successfully provided antireflection (AR) coatings for a wide range of space applications. This paper outlines the results of...

We offer custom prisms, polygons, windows, mirrors, and wedges from one source. FISBA not only has the complete production chain in-house, we can also develop entire systems built-to-spec or support...

Sample LDT of IBS coated epoxy free 1064 nm PBS Cube.

The range of applications in the NIR spectrum is expanding. Many of these are laser-based. Finding the most suitable fused silica for a particular application can be challenging. In this webinar,...

Optical filters can discretely transmit or reject specific wavelengths or ranges of wavelengths of light. Utilizing this capability in photonics-based instruments creates the need for a better...

Imagine optical elements that rival lenses or mirrors superimposed with a precise pattern of microscopic periodic structures. These are diffraction gratings that can be used in a wide range of...

An increasingly wide range of applications need to be able to function in harsh environments, not only on space missions but also here on Earth, in particle detectors, for example. It is important to...

In optics, a motion controller refers to a device or system that precisely controls the movement of optical components, such as mirrors, lenses, stages, or other elements within an optical setup. The...

Optical design and engineering services involve the development, customization, and optimization of optical systems and components to meet specific performance requirements and application needs....

Double-clad fiber (DCF) is a specialized optical fiber that features two concentric cladding layers surrounding a core. The design of double-clad fibers allows them to be used in various...

In optics, "mode beating" refers to an interference phenomenon that can occur in laser systems with multiple longitudinal modes. Longitudinal modes are specific electromagnetic field patterns that...

Evaluating the visual quality of displays as viewed through augmented and virtual reality headsets requires testing from the vantage point of the user. Radiant Vision Systems provides a comprehensive...

LaCroix Precision Optics is a customer-driven, world-class manufacturer of custom precision optics. Our core competencies include spherical lenses, aspheres, achromats, windows, wedges, prisms,...

Welcome to the movies and inside the home of laser optics and coatings! Get an impression of our daily routine and enjoy our thin films film stars ...

Aspheres have allowed optical designers to create systems and products that push the limitations of performance across several fields. In this presentation, we will explain the various processes...

An optical bench is a support for optical parts comprising a solid bed that permits precise longitudinal movement of one component relative to the others, and a number of sliders equipped with...

Optical testing uses a variety of methods and tools to determine the surface contour and performance of optical components and systems.

A vidicon is a small television tube originally developed for closed-circuit television. It is about 1 inch in diameter and 5 inches long. Its controls are relatively simple and can be operated by...

Experts In Thin-film Coating Design We practice a design-before-quote approach to help customers refine specifications and minimize technical risk. We understand how coated optical elements...

Excelitas Technologies® Corp. is a leading industrial technology manufacturer focused on delivering innovative, market-driven photonic solutions to meet the illumination, optical, optronic,...

FOCtek provides customers with all types of custom manufactured lenses, Precision Optical Components, Polarizing Optics, Prisms, Filters, Coatings, Optical Systems, Crystals, Nonlinear Crystals,...

OHARA manufactures more than 130 environmentally safe optical glass types, free of both lead and arsenic. More than 300 tons of optical glass are melted per month, available in the following forms of...