Hamamatsu to Distribute Energetiq Laser Light Sources

Building on an existing multiyear R&D pursuit to establish technology that produces laser pulses at 250 J with a repetition rate of 10 Hz, Hamamatsu Photonics has developed a laser system that...

NASA’s Lunar Flashlight has communicated with mission controllers and confirmed it is healthy after launching Dec. 11 from Cape Canaveral Space Force Station. The satellite embarked on a...

S&P Dow Jones Indices announced that ON Semiconductor will replace IPG Photonics in the S&P 500. IPG Photonics will replace Yelp Inc. in the S&P MidCap 400. SANTA CLARA, Calif....

The U.S. Department of Commerce’s National Institute of Standards and Technology (NIST) released a paper outlining its vision and strategy for a National Semiconductor Technology Center (NSTC),...

The C13220-21MDEU NanoZoomer® S360MD slide scanner system from Hamamatsu is a high-throughput, in vitro diagnostic regulation-compliant model for use in hospitals and clinical laboratories. ...

The ZIVA Light Engine from Lumencor was made for structured illumination microscopy, stochastic optical reconstruction microscopy, and other super-resolution microscopy applications. The engine...

The HVCM-019-032-003-02 Voice Coil Motor from Moticont is 19.1-mm-in. diameter with a 22.2-mm stroke and high force-to-size ratio. The miniature, hollow-core device features a 3.2-mm open...

The Chromatiq Spectral Engine™ from Hamamatsu Photonics generates light with a highly specific spectral content to emulate real-world lighting conditions and other custom spectra to meet...

Light is a versatile tool for investigating physical and chemical processes in nature. Any specific system being analyzed may, through the light it emits or reflects, communicate information about...

Developed in the early 1990s, the silicon photomultiplier (SiPM) is a solid-state photodetector whose sensitivity to light rivals that of a photomultiplier tube (PMT) in a regime where a few hundred...

One of the most critical elements of any time-resolved spectroscopy and dynamics experiment is the optical delay line. A typical optical delay line consists of a retroreflector or folding mirrors on...

Aspheric surfaces are powerful tools that combine the optical corrections of multiple lenses into a single element (Figure 1) and affect performance in ways that spherical optics cannot. For example,...

When it comes to infrared measurements, a lock-in amplifier paired with a pulsed light source is an essential tool to increase the signal-to-noise ratio (SNR) for low light applications. This tech...

The Lumispot Tech LSP-LRS-0310F is a compact and lightweight laser rangefinder module, notable for being the smallest of its kind, weighing only 33 g. It is a highly precise tool for measuring...

3m.i.k.r.o.n.™ is the technology platform for compact, efficient, fast and reliable lasers for a wide range of potential applications in the field of medical engineering and industry.

3m.i.k.r.o.n.™ is the technology platform for compact, efficient, fast and reliable lasers for a wide range of potential applications in the field of medical engineering and industry.

Fourier transform infrared (FTIR) spectroscopy is a spectroscopic technique that relies on optical interference to generate a spectrum. It enables spectral analysis covering a wide range, 1100 to...

FREE WEBINAR Sponsored by: Hamamatsu & Applied Scientific Instrumentation Additional Questions & Answers from the webinar are below: Dr. Kimani C. Toussaint Jr. Quantitative...

Present systems in automotive, process control, and environmental monitoring rely on IR light for successful and optimal operation. A common denominator for nearly all uses of IR and instrumentation,...

Vision-guided robots date back to the beginning of the modern industrial robot age in the early 1980s. Using vision to guide a robot has consistently been a method to add the sense of sight to a...

A spectroradiometer is a device used to measure the intensity of light at different wavelengths across the electromagnetic spectrum. It provides a detailed spectral distribution of light, breaking...

Chip-on-board (COB) lights refer to a type of LED lighting technology where multiple LED chips are directly mounted onto a substrate, typically a printed circuit board (PCB), without the need for...

A lumen is a unit of measurement used to quantify the amount of luminous flux, which is the perceived power of light. In other words, the lumen measures the total amount of visible light emitted by a...

Light diffusion refers to the process by which light is scattered or spread out in various directions as it interacts with a medium or material. Unlike direct transmission through a transparent...

On this month's episode of Light Matters, we take you to central Massachusetts as Worcester Polytechnic Institute and Quinsigamond Community College take on a comprehensive joint photonics laboratory...

On this month's episode of Light Matters, we take you on a brief tour of the Higgins Laboratories at Worcester Polytechnic Institute (WPI). Quinsigamond Community College and WPI received a $4M grant...

Luminate NY, the only optics, photonics and imaging (OPI) accelerator and investment fund in the world, announced the final winners at the Light Tomorrow with Today event in Rochester, NY. For the...

Technology Transfer Programs are often a concerted effort to share skills, knowledge, technologies, methods of manufacturing, samples of manufacturing, and facilities among governments or...

A laser beam profiler is a device that measures the spatial distribution of energy perpendicular to the propagation path of a radiant beam. An energy or power meter is typically used to monitor the...

Spectrum analyzers are scanning devices used to cyclically tune through a given frequency range to determine the amplitude-frequency distribution of the signals present, usually by displaying output...

Hamamatsu Corporation is the North American subsidiary of Hamamatsu Photonics K.K. (Japan), a leading manufacturer of devices for the generation and measurement of infrared, visible, and ultraviolet...

Excelitas Technologies® Corp. is a leading industrial technology manufacturer focused on delivering innovative, market-driven photonic solutions to meet the illumination, optical, optronic,...

FOCtek provides customers with all types of custom manufactured lenses, Precision Optical Components, Polarizing Optics, Prisms, Filters, Coatings, Optical Systems, Crystals, Nonlinear Crystals,...

Established in 1985, OZ Optics is a leading worldwide supplier of fiber optic components, test equipment and sensors. OZ Optics manufactures its products in three locations, Ottawa (Canada),...