ROHM, UAES Open SiC Joint Laboratory

MICROOLED, a manufacturer of high-resolution, low power consumption OLED microdisplays, raised €21 million ($23.6 million) in a fundraising round. MICROOLED is targeting microdisplay...

Semiconductor technology companies STMicroelectronics and Sanan Optoelectronics signed an agreement to create a 200-mm silicon carbide device manufacturing joint venture in Chongqing, China. The fab...

Quantum technology company PsiQuantum expanded its development agreement with SkyWater Technology and its plan to produce silicon photonic chips that will become part of future quantum computing...

Carl Zeiss AG is expanding its executive board, adding Susan-Stefanie Breitkopf as chief transformation officer. Matthias Metz, member of the executive board of Carl Zeiss AG and responsible for the...

The RPR-0720 from ROHM Semiconductor is a compact 2.0 mm × 1.0 mm proximity sensor for applications requiring attachment, detachment, and proximity detection. Integrating a vertical-cavity...

The VIPack™ packaging platform from Advanced Semiconductor Engineering Inc. is designed to enable vertically integrated package solutions. The platform leverages advanced redistribution...

The LX02 KW VCSEL Line Beam Transmitter Module from Focuslight Technologies Inc. is designed for lidar applications. The laser transmitter uses 5-J, high-power VCSEL chips and beam-shaping...

The VAR-SOM-MX93 System on Module from Variscite Ltd. is based on the NXP i.MX93 application processor for smart edge systems. The module runs on a 1.7-GHz Dual Cortex™-A55 NXP iMX93...

When purchasing an industrial laser system, the astute buyer will look for a Class 1 laser product — a system where the laser beam hazard is completely enclosed and there is no potential laser...

Silicon photonics is widely considered a key enabling technology for further development of optical interconnect solutions needed to address growing traffic on the internet. From the first submarine...

The wavelength range of commercially available LEDs with single-element output power of at least 5 mW is 275 to 950 nm. Each wavelength range is made from a specific semiconductor material family,...

With the understanding of aspheric lens manufacturing provided in part one of this article, designers have the tools to optimize their aspheres; the next step is to understand how to specify and...

The optoelectronic properties of an OLED device are mapped using an RMS1000 Confocal Raman Microscope in spectral and time-resolved photoluminescence and electroluminescence imaging modes. These...

MKS' Newport OptoFlash delivers up toe 10 discrete channels where pre-determined wavelength detection is essential to acquiring fast sample measurements.

Advanced Image Intensifier adapter for low light level imaging applications, the Cricket™² is a plug & play camera attachment enabling low light level imaging and extreme high shutter speeds for CMOS...

We offer custom prisms, polygons, windows, mirrors, and wedges from one source. FISBA not only has the complete production chain in-house, we can also develop entire systems built-to-spec or support...

AuSn thin film is a critical technology to enable an optoelectronic device to ensure durability, anti-oxidation ability, and reliability compared with indium, SnPb, SnBi, and others. The application...

The high-gain properties in avalanche photodiodes (APDs) make these devices an ideal choice for low-light-level detection in optical communications, spectroscopy, range finding and many other...

Production-scale testing of silicon photonic devices continues to be a challenge due to the multi-degree-of freedom, high-precision, optical alignments required for wafer- and die-level testing. Wide...

Integrated circuit (IC) manufacturing already requires the use of advanced technology nodes down to 5 nm, and has roadmap plans requiring 2 nm for production within the next couple of years. The...

Silicon carbide (SiC) light-emitting diodes (LEDs) are semiconductor devices that emit light when an electric current is applied to them. These LEDs are made using silicon carbide as the...

Optical design and engineering services involve the development, customization, and optimization of optical systems and components to meet specific performance requirements and application needs....

An LED, or light emitting diode, is a semiconductor device that emits light when an electric current passes through it. LEDs are widely used in various applications due to their energy efficiency,...

Ion-beam sputtering (IBS) is a physical vapor deposition (PVD) technique used for depositing thin films onto substrates. It involves bombarding a target material with a beam of energetic ions,...

On this month's episode of Light Matters, we take you on a brief tour of the Higgins Laboratories at Worcester Polytechnic Institute (WPI). Quinsigamond Community College and WPI received a $4M grant...

Tune into this month's edition of Light Matters for some of the highlights from Optifab 2017, as distributors and buyers from all over the world met in the photonics industry hub of Rochester, New...

In this month's Light Matters Extra, we give you an in-depth look at the recent Luminate Lightning Awards. New York’s Lieutenant Governor Kathy Hochul was there and tells us why Luminate is important...

Students from large and small size companies and bigger Department of Defense affiliates of the AIM Photonics Institute took part in the recent AIM Photonics Summer Academy at MIT. This was the third...

Arkwright Technologies design and manufacture application specific fiber Bragg grating (FBG) sensors. Our innovative, award winning designs have evolved from over 30 years direct expertise in the...

The LaCroix name is synonymous with quality precision optics. Since 1947, three generations of family leadership have guided LaCroix Precision Optics to become the premier precision optics...

Accumold® is a high-tech manufacturer of precision micro, small and lead frame injection molded plastic components. Utilizing processes developed from Accumold's Micro-Mold® technology, the...

Intlvac Thin Film provides PVD (Physical Vapor Deposition) and IBE (Ion Beam Etch) systems for magnetic materials, metals and oxides. Our in-house development lab designs, engineers and manufactures...