Spectros, Caliper Lifer Sign Agreement

Sensor technology company Lumotive secured additional funding from new investors USAA and Uniquest in a $13 million round of strategic funding led by Samsung Ventures, bringing the total amount...

Researchers at the University Hospital Münster and Paris-Saclay University established a method to correct for artifacts caused by changes in blood flow, and recorded cell-specific lactate...

Researchers at the University of Arkansas for Medical Sciences (UAMS) reported advancements to the previously developed Cytophone device. In the current work, the researchers integrated a miniature...

Optical computing company Lightmatter has appointed Ritesh Jain as vice president of engineering. This follows the recent appointments of Jessie Zhang as vice president of finance and Steve Klinger...

The Ophir SP504S Beam Profiling Camera from MKS Instruments Inc. measures large and divergent beams by accurately capturing and analyzing wavelengths from 340 to 1100 nm for beam sizes from 45...

The Retiga E9 from Teledyne Photometrics is a long exposure camera that can capture exposures from tens of microseconds to tens of minutes. Featuring stacked CMOS sensor technology developed by Sony,...

The semiconductor-based S3C-1 streak camera from Optronis GmbH provides researchers with an instrument that enables detailed scientific investigations in ultrafast processes. Streak cameras...

The AS7058 from ams OSRAM is an analog front end (AFE) that uses photoplethysmography (PPG) signals to improve the reliability and accuracy of wearable devices. Producing an optical signal-to-noise...

The term fluorescence is often applied as a synonym for photoluminescence, although luminescence actually covers fluorescence and phosphorescence. Both of these terms describe the process of...

As recently as five years ago, shopping for a microscope light source was fairly straightforward. For routine applications, it was tungsten halogen, typically 100 W, while for fluorescence, it was an...

Aspheric surfaces are powerful tools that combine the optical corrections of multiple lenses into a single element (Figure 1) and affect performance in ways that spherical optics cannot. For example,...

The wavelength range of commercially available LEDs with single-element output power of at least 5 mW is 275 to 950 nm. Each wavelength range is made from a specific semiconductor material family,...

Finding the ideal ultra-fast laser source for a multiphoton imaging setup is not trivial. It is a fine balance between peak power, pulse energy and laser wavelength. In this white paper we show that...

Producing optics for medical devices has its own unique set of difficulties and challenges including cost, turnaround time, performance, and standards. This paper talks about those challenges and...

This whitepaper looks at the unique challenges associated with optical systems by exploring two extremes, an ultra-high precision instrument, and a low-cost consumer product, and the different...

An overview of the Single-Objective Light Sheet.

Alon Greenbaum discusses methods for quantitative analysis of intact organs using tissue clearing and adaptive light-sheet microscopy. As a test case, he presents macroscopic and microscopic...

Swept-source optical coherence tomography (SS-OCT) system performance is primarily determined by the rapid tuning speed and wide tuning bandwidth of the swept laser source, as well as the...

Startups often can’t find the funding or the right resources to bring emerging technologies to market. This webinar will take an in-depth look at how the Luminate Accelerator is addressing...

The sensor is a central component of any machine vision system. The type of sensor and features it provides will affect overall image quality; so it is important to know how to specify the features...

This type of miniaturized system, referred to as CMOS qPCR, combines microfluidic technology with an ultralow-light CMOS bio-optical sensor with LEDs as the optical excitation source to achieve...

The field of view (FOV) refers to the extent of the observable world or the visible area that can be seen at any given moment through a device, such as an optical instrument, camera, or sensor. It is...

A microchannel plate (MCP) is a specialized electron multiplier device used in various applications such as particle detection, imaging, spectroscopy, and night vision technology. It consists of a...

A PIN photodiode is a type of photodetector or semiconductor device used to convert light signals into electrical signals. The name "PIN" is derived from the arrangement of the three semiconductor...

This hands-on session about FD-FLIM by Gerhard Holst from PCO AG was given as part of the FLIM Symposium "Beginners Guide to Fluorescence Lifetime Imaging in Life Sciences".

Objective lenses are used in microscopy systems for a range of scientific research, industrial, and general lab applications. A microscope objective is typically composed of multiple lens elements...

Optolong Optics Co. Ltd., brand owner of Optolong, is a manufacturer of fluorescence filters and astronomy filters. We also offer other interference filters including UV filters, visible filters, and...

Established in 1990, Applied Scientific Instrumentation is a reknown American company committed to the advancement of science. ASI products have been thoroughly tested and evaluated in numerous labs...

Established in 1985, OZ Optics is a leading worldwide supplier of fiber optic components, test equipment and sensors. OZ Optics manufactures its products in three locations, Ottawa (Canada),...

CASTECH is a recognized leading supplier of nonlinear optical crystals, laser crystals and precision optical components for laser, telecom, medical, analysis and detector markets. Products...

Expanding upon the storied Fairchild Imaging legacy, we offer a wide range of imaging devices that provide our customers with top performance and key features for the most demanding applications. Our...

The Optical Engineering Experts® Optikos designs and manufactures metrology products for measuring and assuring optical image quality; and provides optical engineering design, development,...