Veeco to Expand Manufacturing Capabilities for Laser Annealing Tech

Qcells, a clean energy technology company, will invest $100 million to accelerate the commercialization of perovskite-based tandem cells, a solar cell technology designed to boost panel efficiency....

Hamamatsu Photonics started construction on a factory at its Shingai site in Japan. The new site will serve to increase overall construction capacity in the post-processing (dicing, assembly, and...

Lidar technology company Cepton received a nonbinding letter of intent for an investment of up to $100 million from its long-term automotive Tier 1 partner and current shareholder Koito Manufacturing...

MICROOLED, a manufacturer of high-resolution, low power consumption OLED microdisplays, raised €21 million ($23.6 million) in a fundraising round. MICROOLED is targeting microdisplay...

The FRT MicroProf® PT from FormFactor Inc. is a metrology and inspection system for high-throughput panel measurement in advanced packaging. The system is capable of handling rectangular...

The Claxon Fiber CPXoF frame grabber from BitFlow Inc. is a PCI Express board configured with a single port for QSFP+ hot-swappable, parallel fiber-optical/copper transceiver modules. Equipping...

The ADVANTECH™ hard coat bandpass filters from Andover Corp. offer steep slopes, high light transmission, durability, and long life for demanding applications. The filters provide...

The HyperRapid NXT 266 industrial-grade deep UV picosecond laser from Coherent offers precision manufacturing as small as 5 µm. The device can ablate holes, trenches, through cuts, and...

Silicon photonics is widely considered a key enabling technology for further development of optical interconnect solutions needed to address growing traffic on the internet. From the first submarine...

When purchasing an industrial laser system, the astute buyer will look for a Class 1 laser product — a system where the laser beam hazard is completely enclosed and there is no potential laser...

One of the most critical elements of any time-resolved spectroscopy and dynamics experiment is the optical delay line. A typical optical delay line consists of a retroreflector or folding mirrors on...

Technological advances have resulted in new, higher-quality sensors that enable machine vision cameras to deliver greater features and functionality at a lower cost than ever before. These factors...

DayOptics Introduction and its Products Displayed

This document outlines how Seiwa Optical's fully automated inspection equipment can increase the threshold, reduce chip loss, and decrease production costs of wafer manufacturing.

A great "How-to" for cleaning optics. A must have for ALL.

In this application note, we share spectra that demonstrate performance characteristics of the Ocean SR2, a modular UV-Visible spectrometer. We evaluate the effectiveness of the Ocean SR2 for...

Optical components such as lenses, mirrors, prisms, and windows undergo tight quality control to deliver optimal optical transfer function. Any scratch, dig, chip pinhole, or other defect will...

Machine vision applications have expanded rapidly beyond the controlled environments of the factory, and with this expansion, the need for ruggedized lens designs has grown, with the requirements...

Surface and wavefront measurements demand increasing precision and accuracy as specifications tighten on high-performance components. This is true even when production or test environments are...

AR/VR/XR is becoming more widespread, creating new consumer and enterprise experiences. As the technology expands, AR/VR/XR headsets are becoming imbued with increasingly advanced functionality....

Laser annealing is a process that involves using a laser beam to heat and modify the microstructure of a material, typically a thin film or surface layer, with the objective of improving its...

Fused quartz and silica are closely related materials, both composed primarily of silicon dioxide (SiO2), but they are produced through different manufacturing processes and have distinct properties...

In optics and photolithography, a phase mask refers to a device that modifies the phase of light waves passing through it. The phase mask is used to control the spatial distribution of the light's...

Silicon carbide (SiC) light-emitting diodes (LEDs) are semiconductor devices that emit light when an electric current is applied to them. These LEDs are made using silicon carbide as the...

Technology Transfer Programs are often a concerted effort to share skills, knowledge, technologies, methods of manufacturing, samples of manufacturing, and facilities among governments or...

San Jose, California is home to historic landmarks like the Hayes Mansion, and the Cathedral Basilica of St. Joseph. It was the first capital of the golden state, and more than a hundred years later,...

-Diamond Circuits -CLEO Tech Xfer -Injectable LEDs On this week’s show: the Navy will have a shipborne laser cannon in 2014, injectable LEDs and a transparency-inducing hydrogel aim to aid brain...

Our optical design team employs DFM principles to ensure optimal performance, cost-efficiency, and timely production of our solutions. Our state-of-the-art metrology ensures thorough testing of each...

OHARA manufactures more than 130 environmentally safe optical glass types, free of both lead and arsenic. More than 300 tons of optical glass are melted per month, available in the following forms of...

The Optical Engineering Experts® Optikos designs and manufactures metrology products for measuring and assuring optical image quality; and provides optical engineering design, development,...

At PFG Precision Optics our first priority has always focused on advancing technical competence to provide superior optical products to our customers. We produce a broad offering of very high...

Precision Optical: our name embodies who we are. Since 1959, Precision Optical has earned a widely recognized reputation for reliability, value, and quality precision optics for the most demanding...