Close

Search

Search Menu
Photonics Media Photonics Buyers' Guide Photonics EDU Photonics Spectra BioPhotonics EuroPhotonics Industrial Photonics Photonics Showcase Photonics ProdSpec Photonics Handbook
More News
share
Email Facebook Twitter Google+ LinkedIn Comments

Researchers Create New Class of High-Energy, Tunable Laser Materials

Photonics.com
Jul 2018
LA JOLLA, Calif., July 24, 2018 — Engineers doped alumina (Al2O3) crystals with neodymium (Nd) ions to develop a new laser material capable of emitting ultrashort, high-power pulses. Their approach to materials processing resulted in a Nd-Al2O3 laser gain medium that has 24× higher thermal shock resistance than one of the leading solid-state laser gain materials.

Nd and Al2O3 are two of the most widely used components in today’s solid-state laser materials. However, alumina crystals typically host small ions like titanium or chromium. Neodymium ions are too big — they are normally hosted inside a yttrium aluminum garnet (YAG) crystal.

To address this issue, the team from the University of California, San Diego tailored the crystallite size to other important length scales, i.e., the wavelength of light and interatomic dopant distances, which minimized optical losses and allowed successful Nd doping.

New class of laser materials, UC San Diego.
By doping alumina crystals with neodymium ions, engineers at the University of California, San Diego have developed a laser material capable of emitting ultrashort, high-power pulses — a combination that could potentially yield smaller, more powerful lasers with superior thermal shock resistance, broad tunability, and high-duty cycles. Courtesy of Elias Penilla.

The new process involves rapidly heating a pressurized mixture of Al2O3 and Nd powders at a rate of 300 °C per minute until the mixture reaches 1260 °C. This is hot enough to dissolve a high concentration of Nd into the Al2O3 lattice. The solid solution is held at that temperature for five minutes and then rapidly cooled, also at a rate of 300 °C per minute.

The team characterized the atomic structure of the Nd-Al2O3 crystals using x-ray diffraction and electron microscopy. To demonstrate lasing capability, researchers optically pumped the crystals with IR light (806 nm). The material emitted amplified light (gain) at a lower frequency IR light at 1064 nm.

In tests, researchers showed that Nd-Al2O3 has 24× higher thermal shock resistance than Nd-YAG, one of the leading solid-state laser gain materials.

“This means we can pump this material with more energy before it cracks, which is why we can use it to make a more powerful laser,” said professor Javier Garay.

Traditionally, alumina is doped by melting it with another material and then cooling the mixture slowly so that it crystallizes.

“However, this process is too slow to work with neodymium ions as the dopant — they would essentially get kicked out of the alumina host as it crystallizes,” said researcher Elias Penilla.

The team speeded up the heating and cooling steps enough to prevent neodymium ions from escaping. The Nd-Al2O3 hybrid was made by rapidly heating and cooling the two solids together.

New class of laser materials, UC San Diego.

Neodymium-alumina (left) shows no signs of cracking at 40 W with applied optical pumping at 808 nm, while neodymium-YAG (right) cracks at 25 W. Courtesy of Elias Penilla.

“Until now, it has been impossible to dope sufficient amounts of neodymium into an alumina matrix," Garay said.  "We figured out a way to create a neodymium-alumina laser material that combines the best of both worlds: high power density, ultrashort pulses, and superior thermal shock resistance.”

The team is working on building a laser with their new material.

“That will take more engineering work," Garay said. "Our experiments show that the material will work as a laser and the fundamental physics is all there.”

The successful demonstration of gain and high bandwidth in a medium with superior Rs could lead to the development of lasers with previously unobtainable high-peak powers, short pulses, tunability, and high-duty cycles.

The research was published in Light Science & Applications (doi:10.1038/s41377-018-0023-z).

Penilla will be presenting this work on Aug. 19 at the 2018 SPIE Optical Engineering + Application Meeting in San Diego.

GLOSSARY
optical materials
Materials that, by virtue of their optical characteristics (i.e. refractive index, dispersion, etc.), are used in optical elements. See crystal; glass; plastic lens.
Research & TechnologyeducationAmericaslasersmaterialsmaterials processingTunable Laserspulsed lasersultrafast lasersLEDslight sourcesoptical materialsoptical structuresUniversity of CaliforniaSan Diegohigh-energy laser

Comments
Terms & Conditions Privacy Policy About Us Contact Us
back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2018 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, info@photonics.com

Photonics Media, Laurin Publishing
x We deliver – right to your inbox. Subscribe FREE to our newsletters.
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.