Search Menu
Photonics Media Photonics Buyers' Guide Photonics EDU Photonics Spectra BioPhotonics EuroPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook
More News

Sensor chirps to sniff out trace gases

Facebook Twitter LinkedIn Email Comments
Compiled by Photonics Spectra staff

A new “chirping” sensor developed at the National Institute of Standards and Technology detects trace gases hundreds of times more quickly than similar technologies in use today. The sensor is also more sensitive and may make detectors portable, economical and fast enough to be used anywhere.

A trace level of a particular gas can indicate that a problem exists nearby, but many sensors are able to spot only a specific type of gas and, in some cases, only after a long sample analysis time. The new sensor works quickly and efficiently to detect potentially harmful gases.

A still image of the animated graph shows the NIST detector’s linear increase in frequency as a function of time, sweeping from 550 to 561 GHz in frequency over 100 ns. Here it is slowed to 5 s, with an audio chirp used as an analogy to the terahertz chirp. Courtesy of Plusquellic, NIST.

Built from off-the-shelf technology, the sensor can be carried in the user’s hands and can simultaneously detect many different trace gases at very fast rates and with high sensitivity, the researchers said. To do so, it uses terahertz frequencies, which can make gas molecules rotate at rates unique to each type of gas, holding great promise for identifying and quantifying specific gases.

The technology rotates the molecules “in phase” and detects the spinning molecules easily as they gradually fall out of phase with each other. The new technique makes it possible to look at nearly all possible gas molecules instantly using terahertz frequencies. Previously, it was necessary to expose molecules to a range of terahertz frequencies – slowly, one after another. To rapidly expose the molecules to the range of frequencies, the scientists had to teach their off-the-shelf equipment to “chirp.”

They have applied for a patent for their system, which can plug into a power outlet and should be robust enough to survive in a real-world working environment. Findings appeared in the April 22, 2011, issue of Optics Express (doi: 10.1364/ OE.19.008973).

Photonics Spectra
Aug 2011
Americaschirping sensorimagingMarylandNational Institute of Standards and TechnologyNISTNIST sensorResearch & TechnologySensors & DetectorsTech Pulseterahertz frequencytrace gas detection

back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2019 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA,

Photonics Media, Laurin Publishing
x Subscribe to Photonics Spectra magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.