Search Menu
Photonics Media Photonics Buyers' Guide Photonics Spectra BioPhotonics EuroPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook

Sharper Focus for Soft X-Rays

Facebook Twitter LinkedIn Email Comments
BERKELEY, Calif., July 1 -- Progress in nanoscience and nanotechnology depends not only on examining the surfaces of things but on seeing deep inside biological organisms and material structures to identify what they're made of -- and what electronic, magnetic, optical and chemical processes might be at work.

For measuring internal variations in shape, organization, magnetism, polarization or chemical makeup over distances of a few nanometers (billionths of a meter), x-ray microscopy both complements electron microscopy and offers important advantages. The XM-1 x-ray microscope at the Advanced Light Source, located at the Department of Energy's Lawrence Berkeley National Laboratory, uses bright beams of "soft" x-rays to produce images that reveal structures and that can identify their chemical elements and measure their electromagnetic and other properties.

The Center for X-Ray Optics' new technique for creating high-resolution zone plates involves two separate patterns of alternating zones fabricated sequentially and overlaid on the same wafer.
   A new method to create optical devices with nanoscale accuracy has allowed researchers in Berkeley Lab's Center for X-Ray Optics (CXRO), which built and operates the XM-1, to achieve an extraordinary resolution of better than 15 nanometers, with the promise of even higher resolution in the near future. CXRO's Weilun Chao, Bruce Harteneck, Alexander Liddle, Erik Anderson and David Attwood described their findings this week in a letter to the journal Nature.

"Our new technique permits fabrication of remarkably small 3-D structures," said Weilun Chao, of Berkeley Lab's Materials Sciences Division. Chao helped develop the technique as part of his recent doctoral thesis in the Electrical Engineering and Computer Sciences Department at the University of California at Berkeley (UC Berkeley). "We believe this is a breakthrough in the difficult process of fabricating small structures by means of electron beam lithography."

Since x-rays can't be focused by glass lenses, the XM-1 uses lenses made of zone plates, disks of concentric rings of metal from which soft x-rays are diffracted to a focus. An objective lens called a "micro" zone plate (MZP) projects a full-field image of the sample -- e.g., the interior of frozen bacteria or layers of a magnetic alloy -- onto a charge-coupled device. The smaller the gap between the MZP's rings, the tighter the focus and the higher the image resolution.

CXRO fabricates its own zone plates with an electron-beam lithography tool called the Nanowriter. An energetic beam of electrons just seven nanometers wide carves preprogrammed patterns in a silicon wafer coated with a resist. The carved-out circular patterns in the resist are then replaced with opaque gold to form an object that under magnification superficially resembles a long-playing gold record album -- but one only 30 micrometers (millionths of a meter) in diameter.

With the new technique the zones were spaced approximately 15 nanometers apart (30 nanometers between the centers of each gold zone). Future improvements will be directed at narrower zones with no gaps and even closer spacing.

To achieve high resolution depends on the ability to squeeze the zones close together, with a placement accuracy no less than a third of the width of the zones themselves. Accurate placement of 15-nanometer-wide zones allows no more than a 5-nanometer leeway. In fact, the Nanowriter is capable of placement accuracy to within two nanometers, allowing for even greater improvements in resolution in the future.

Unfortunately, no matter how accurately it is aimed, even a tight beam of electrons spreads out when it hits the resist. Electron scattering, combined with inherent limits in the resolution of the resist itself, makes it impossible at this time to maintain high contrast and optical separation between features. Previously, the best separation between zones the Nanowriter could achieve to make the XM-1's current objective lens was 25 nanometers.

To overcome this limit, the CXRO researchers decided to overlay and combine two different zone-plate patterns. Opaque zones are typically given even numbers, so in this scheme the first pattern contains zones 2, 6, 10, 14 and so on, and the second contains zones 4, 8, 12, 16 and so on. The first pattern is carved into the resist-coated wafer; then the zones formed by the electron patterning are filled with gold. The wafer is coated with resist again to make the second pattern.

The critical outer zones of the combined patterns were less than 15 nanometers apart, accurately placed to within less than two nanometers. Aligning the separately processed patterns was the key to success. Accuracy was achieved with software that calculated the deflection and distortion of the Nanowriter's beam as it traced out the concentric circular patterns.

The placement of the zones in the first MZP made with this technique was nearly perfect, although there was room for improvement in other areas. The opaque gold zones were broken by tiny gaps, and they were wider (and the transparent zones between them narrower) than they should have been, reducing the zone plate's efficiency. Nevertheless, the experimental MZP was used to obtain images sharper than any previously achieved with an x-ray microscope.

Not only were images of test patterns (lines formed by layers of chromium and silicon in cross-section) sharper than those made with the XM-1's current 25-nanometer-resolution MZP, the new MZP was able to obtain sharp images of lines a mere 15 nanometers apart -- where the older zone plate had seen only a featureless field of gray.

David Attwood, founder and former director of the Center for X-ray Optics and a professor of electrical engineering at UC Berkeley, said, "Nanoscience and nanotechnology are everywhere around us -- biology and chemistry are nanoscience by nature -- but we need better analytical tools to see what we're looking at. Electron microscopy, scanning-tunneling microscopes, atomic-force microscopes -- they're all good, but they can't give you identification of chemical elements and compounds. The great advantage of photons is that there are very specific differences in their interactions with atoms: you can tell when you're looking at iron; you know when you're looking at cobalt."

Because they need bright beams of photons, x-ray microscopes are presently found only at synchrotrons like those in the United States that are sponsored by the Department of Energy. But the CXRO researchers suggest that before too many years, new sources of very bright, soft x-rays -- from compact, laser-based x-ray sources, for example -- will make it possible to build x-ray microscopes that will fit on a benchtop. They said nanoscience and nanotechnology will be both the beneficiaries of and the driving forces behind the widening horizon for nanoscale analysis, which was opened by the new techniques in soft-x-ray optics.

For more information, visit:
Jul 2005
Advanced Light SourceBasic ScienceCenter for X-Ray OpticsindustrialLawrence Berkeley National LaboratoryMicroscopynanosciencenanotechnologNews & FeaturesXM-1 x-ray microscope

back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2020 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, [email protected]

Photonics Media, Laurin Publishing
x We deliver – right to your inbox. Subscribe FREE to our newsletters.
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.